Disk Drives - IBM 2158240 - Aptiva E - 2158 Maintenance And Service Manual

To view the video information such as the video controller and video memory,
select the video information option from the setup menu.
Select primary display adapter to initialize onboard VGA as the boot display
device. Select Auto to initialize PCI add-on VGA card as the boot display
device if a PCI add-on card is found; otherwise, onboard VGA will be initialized.
To view the computer information such as the model number, serial number,
and BIOS version and date, select the Model Information option from the Setup
main menu. Like in the System Information menu, the items displayed are not
configurable.

Disk Drives

If you install a new diskette, hard disk, or CD/DVD-ROM drive, BIOS auto-
detects the presence of these devices. Enter Setup to identify or verify the type
of drive installed in the computer.
If you want to change any drive setting, select Disk Drives from the main menu.
The Disk Drives menu appears showing the diskette drive and IDE drive
parameters.
Diskette Drive A
This option displays the size and storage capacity of the currently installed
diskette drive. Empty drive bays are indicated with a "None" setting.
LS-120 Drive As
This option allows user to set for the LS-120 drive. Empty drive bays are
indicated with a "Normal" setting. Its possible settings are:
Normal The LS-120 drive is configured by Windows 98 and acts as an ATAPI
removal media.
Drive A System recognizes the LS-120 drive as drive number 0 (drive A). If a
standard diskette drive A exists, system automatically identifies it as drive B.
Drive B System recognizes the LS-120 drive as drive B.
ATTENTION: If "Boot Sequence" in "Startup Options" is set to CD-ROM and a
bootable CD is loaded, BIOS identifies LS-120 (original set as drive A)
as drive B and the standard diskette drive becomes inaccessible.
IDE Hard Disk and CD/DVD-ROM Drives
The Disk Drives menu includes four IDE drive items that allow you to configure
the hard disk drives and the CD/DVD-ROM drive. Selecting any one of these
items displays a submenu with details on a particular IDE drive.
The IDE drive items are identified as follows:
14