5.25-In. Hard Disk Drive Jumper Settings - IBM 2158240 - Aptiva E - 2158 Maintenance And Service Manual

5.25-In. Hard Disk Drive Jumper Settings

5.25-In. Hard Disk Drive Jumper Settings

DS CS/SP
On Off
Off Off
On On
The configuration of the following four jumpers controls the drive's mode of
operation:
•
DS - Drive Select
•
CS-Cable Select
•
PARK - Park or Store position
120
Description
Drive is configured as a Master.
Drive is configured as a Slave.
Drive is configured as a Master, with an
attached Slave that supports DASP