IBM 2179 User Manual
  1. Manuals
  2. Brands
  3. IBM Manuals
  4. Desktop
  5. 2179
  6. User manual
IBM 2179 User Manual

IBM 2179 User Manual

Hide thumbs Also See for 2179:
Table of Contents

Advertisement

Quick Links

Download this manual
For the latest version of this online publication,
go to http://www.ibm.com/pc/support
User Guide
Type 2179

Advertisement

Table of Contents
loading

Related Manuals for IBM 2179

Summary of Contents for IBM 2179

  • Page 1 For the latest version of this online publication, go to http://www.ibm.com/pc/support User Guide Type 2179...
  • Page 3 For the latest version of this online publication, go to http://www.ibm.com/pc/support User Guide Type 2179...
  • Page 4 “Product warranty and notices” on page 79. Second Edition (August 2000) © Copyright International Business Machines Corporation 2000. All rights reserved. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

  • Page 5: Table Of Contents

    Glare and lighting Air circulation . Electrical outlets and cable lengths . Connecting cables USB connectors Audio connectors . Other connectors . 10 Recording identification numbers . . 10 Starting the computer . . 11 © Copyright IBM Corp. 2000...
  • Page 6 . 14 Shutting down the computer . 15 Using the Rapid Access III keyboard . . 15 Using the IBM ScrollPoint III mouse . . 17 Accessing the diskette drive and CD-ROM or DVD-ROM drive . . 18 Using diskettes .
  • Page 7 Creating an IBM Enhanced Diagnostics diskette . . 66 Running the IBM Enhanced Diagnostics program. . 66 To run diagnostics from the IBM Enhanced Diagnostics diskette: . 67 To run diagnostics from the Product Recovery CD or program: . . 67 Replacing the battery .
  • Page 8 Product warranty and notices . 79 Warranty Statements . . 79 IBM Statement of Limited Warranty for United States, Puerto Rico, and Canada (Part 1 - General Terms) . 79 IBM Statement of Warranty Worldwide except Canada, Puerto Rico, Turkey, United States (Part 1 - General Terms) .

  • Page 9: Safety Notices

    Ne manipulez aucun câble et n’effectuez aucune opération d’installation, d’entretien ou de reconfiguration de ce produit au cours d’un orage. v Branchez tous les cordons d’alimentation sur un socle de prise de courant correctement câblé et mis à la terre. © Copyright IBM Corp. 2000...
  • Page 10 v Branchez sur des socles de prise de courant correctement câblés tout équipement connecté à ce produit. v Lorsque cela est possible, n’utilisez qu’une seule main pour connecter ou déconnecter les câbles d’interface.; v Ne mettez jamais un équipement sous tension en cas d’incendie ou d’inondation, ou en présence de dommages matériels.

  • Page 11: Lithium Battery Notice

    CAUTION: Danger of explosion if battery is incorrectly replaced. When replacing the battery, use only IBM Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed...

  • Page 12: Laser Compliance Statement

    En cas de fuite de gaz, n’utilisez jamais un téléphone situé à proximité de la fuite. Laser compliance statement Some IBM Personal Computer models are equipped from the factory with a CD-ROM drive or a DVD-ROM drive. CD-ROM drives and DVD-ROM drives are also sold separately as options. CD-ROM drives and DVD-ROM drives are laser products.
  • Page 13 DANGER Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. DANGER: Certains modèles d’ordinateurs personnels sont équipés d’origine d’une unité de CD-ROM ou de DVD-ROM. Mais ces unités sont également vendues séparément en tant qu’options.
  • Page 14 User Guide...

  • Page 15: About This Book

    About this book ® This book will help you become familiar with your IBM computer and its features. It describes how to operate, maintain, and install options in your computer. In the unlikely event you experience problems, you will find helpful troubleshooting information and instructions for obtaining service in this book.

  • Page 16: Related Information

    Related information The following is a description of the publications that contain additional information about your computer. These documents are available in Adobe Acrobat PDF files at http://www.ibm.com/pc/support on the World Wide Web. v About Your Software This publication contains information about the operating system, device drivers, applications, and product recovery software.

  • Page 17: Chapter 1. Product Overview

    Chapter 1. Product overview Thank you for selecting an IBM computer. Your computer incorporates many of the latest advances in computer technology. This chapter provides an overview of the computer, features, and preinstalled software. Identifying your computer In most instances, the best way to identify your computer is by the machine type/model number.

  • Page 18: Hardware Features

    Hardware features The following information covers a variety of models. For a listing of features for your specific model, refer to the System Summary screen in the Configuration/Setup Utility. For more information, see “Chapter 4. Using the Configuration/Setup Utility program” on page 31. Microprocessor ®...

  • Page 19: Keyboard And Mouse Features

    IBM Rapid Access III, Universal Serial Bus (USB), keyboard (some models) v Two USB connectors on the Rapid Access III keyboard v IBM Preferred USB keyboard (some models) Expansion capability v Two low-profile PCI adapter expansion slots v Five USB connectors...

  • Page 20: Software

    Access IBM The Access IBM program is preinstalled on your computer and is accessible from the Windows desktop. It provides the following: Start up This selection provides topics about setting up your computer.

  • Page 21: Chapter 2. Setting Up Your Computer

    Select a location for the computer where it will remain dry. Leave about 50 mm (2 in.) of space around the computer for proper air circulation. © Copyright IBM Corp. 2000...

  • Page 22: Arranging Your Workspace

    Arranging your workspace To get the most from your computer, arrange both the equipment you use and your work area to suit your needs and the kind of work you do. Your comfort is of foremost importance, but light sources, air circulation, and the location of electrical outlets can also affect the way you arrange your workspace.

  • Page 23: Air Circulation

    Where it is impossible to avoid reflections or to adjust the lighting, place an antiglare filter over the screen. However, these filters might affect the clarity of the image on the screen; try them only after you have exhausted other methods of reducing glare.

  • Page 24: Connecting Cables

    When arranging your workspace: v Avoid the use of extension cords. Whenever possible, plug the computer power cord directly into an electrical outlet. v Keep power cords and cables neatly routed away from walkways and other areas where they might be accidentally dislodged. Connecting cables Read the following before connecting cables: v Connect all device cables before plugging any power cords into an electrical...

  • Page 25: Usb Connectors

    USB connectors There are five USB connectors on your computer: three at the rear 2 and two on the right side 3 of the monitor. In addition, if you have a Rapid Access keyboard, there are two USB connectors at the rear of the keyboard. When setting up your computer for the first time, plug the keyboard and the mouse cables into USB ports at the rear of the computer near the power cord connector 1 .

  • Page 26: Other Connectors

    77. See “Related information” on page xiv for sources of other information about your computer. For information about IBM-installed software, see the About Your Software publication. Additional programs and device drivers are on the Software Selections CD and, in some cases, on other CDs and diskettes.

  • Page 27: Starting The Computer

    Starting the computer Go to Chapter 2 ″Getting Started″ in the About Your Software publication to continue with the software setup of your computer. For information about how to turn on your computer, see “Chapter 3. Operating and caring for your computer”...
  • Page 28 User Guide...

  • Page 29: Copyright Ibm Corp. 2000

    4 LCD brightness increase button indicator 5 LCD brightness decrease button 10 Diskette drive in use indicator 6 Device bay release button 11 Diskette drive The following is a description of the controls and status indicators for your computer. © Copyright IBM Corp. 2000...

  • Page 30: Starting Your Computer

    Hard disk drive in-use indicator: When this light is on, it indicates that the hard disk drive heads are being positioned or that your computer is reading from or writing to the hard disk. Do not turn off your computer when this indicator is on or blinking.

  • Page 31: Shutting Down The Computer

    Some of these buttons are permanently set to start certain programs on your computer. The preset functions are printed on the label above the buttons. Three of the buttons, EMail, Access IBM Web, and Standby, are permanently programmed. Depending on the preloaded operating system loaded in your computer, three of the remaining five buttons might be preset.
  • Page 32 1 Standby button Multimedia controls 2 Standby LED 6 Mute button 3 Num Lock LED 7 Stop button 4 Caps Lock LED 8 Play/Pause button 5 Scroll Lock LED 9 Volume control 10 Next track button 11 Previous track button To customize a Rapid Access Button, do the following: 1.

  • Page 33: Using The Ibm Scrollpoint Iii Mouse

    Using the IBM ScrollPoint III mouse The ScrollPoint III mouse has the following controls. 1 Primary mouse button: Use this button to select or start a program or menu item. 2 Quick/auto scroll button: Use this button to put the mouse into auto-scroll mode.

  • Page 34: Accessing The Diskette Drive And Cd-Rom Or Dvd-Rom Drive

    Accessing the diskette drive and CD-ROM or DVD-ROM drive The diskette drive and CD-ROM or DVD-ROM drive are located in a drop-down device bay. To lower the device bay for access to the diskette and CD-ROM or DVD-ROM drives, press the device bay release button 1 . To close the device bay, push upward on the CD-ROM or DVD-ROM drive until it latches in the closed position.

  • Page 35: Using Diskettes

    Using diskettes You can use 3.5-inch diskettes in the diskette drive of your computer. Data is stored on the magnetic surface of the diskette. This surface is protected by a plastic cover. Handling and storing diskettes Inside the protective diskette case is a flexible disk with a magnetic-sensitive coating.

  • Page 36: Write-Protecting Diskettes

    Write-protecting diskettes It is possible to accidentally format a diskette or unintentionally write data to it. Important information can be written over or lost. For this reason, it is a good idea to write-protect important diskettes. You can read data from a write-protected diskette, but you cannot erase or change the data.

  • Page 37: Handling A Cd Or Dvd Disc

    v Do not place the drive where there is: – High temperature – High humidity – Excessive dust – Excessive vibration or sudden shock – An inclined surface – Direct sunlight v Do not insert any object other than a CD or DVD into the drive. v Before moving the computer, remove the CD or DVD from the drive.

  • Page 38: Inserting And Removing A Cd Or Dvd Disc

    Inserting and removing a CD or DVD disc To insert a disc: 1. With the computer turned on, press the eject button. The tray slides partway out of the drive. Manually pull the tray the rest of the way out. 2.

  • Page 39: Using Video Features

    Product Recovery CD that comes with your computer. If your computer has IBM-preinstalled software, video device drivers have already been installed on the hard disk. However, you can use the device driver installation instructions if you need to reinstall the device drivers or if you need information on obtaining and installing updated device drivers.

  • Page 40: Recording And Playing Back Sound

    – If you click the speaker icon one time, the volume control is displayed. Use your mouse to drag the volume-control slider up or down to control the volume, or select the Mute check box to turn the audio off. –...

  • Page 41: Using The Standby Button On The Keyboard

    Using the Standby button on the keyboard If you are using the Rapid Access keyboard, you can put the computer in Standby mode by pressing the Standby button located at the top of the keyboard. The LED in the Standby button illuminates when the monitor is in a low-power or sleep state.

  • Page 42: Using Security Features

    3. Double-click Power Management (Windows 98) or Power Options(Windows 2000 Professional and Windows Me). The Power Management or Power Options Properties window opens. 4. From the Power Schemes tab, you can: v Select an existing power scheme with preset durations v Modify an existing power scheme by changing the preset durations v Create a new power scheme with custom durations 5.

  • Page 43: Basics

    Basics Here are some basic points about keeping your computer functioning properly: v Keep your computer in a clean, dry environment. Make sure it rests on a flat, sturdy surface. v Do not place items on top of the monitor or cover any of the vents in the monitor or computer.

  • Page 44: Mouse

    Mouse If the pointer on the screen does not move smoothly with the mouse, you might need to clean the mouse. To clean your mouse, do the following: 1. Turn off the computer. 2. Disconnect the mouse cable from the computer. 3.

  • Page 45: Moving Your Computer

    Moving your computer Take the following precautions before moving your computer. 1. Remove all media (diskettes, compact discs, tapes, and so on) from the drives. 2. Turn off the computer and all attached devices. Your hard disk drive automatically parks the read/write heads to prevent damage to the hard disk.
  • Page 46 User Guide...

  • Page 47: Chapter 4. Using The Configuration/Setup Utility Program

    Enter. See “Using passwords” on page 33 for more information. The Configuration/Setup Utility program might start automatically when POST detects that hardware has been removed or new hardware has been installed in your computer. © Copyright IBM Corp. 2000...

  • Page 48: Viewing And Changing Settings

    Viewing and changing settings The Configuration/Setup Utility menu displayed by your computer might look slightly different from the menu shown here, but it will operate the same way. Configuration/Setup Utility Select Option: v System Summary v Product Data v Devices and I/O Ports v Start Options v Date and Time v Advanced Setup...

  • Page 49: Exiting From The Configuration/Setup Utility Program

    ↑↓ Use these arrow keys to move among menu items until the item you want is highlighted. ←→ Use these arrow keys to display and toggle among choices for a menu item. Press this key to select a highlighted menu item. Enter Press this key to exit from a menu after viewing or making changes to the settings in the menu.

  • Page 50: Setting, Changing, And Deleting A Password

    After you set an administrator password, a password prompt is displayed each time you try to access the Configuration/Setup Utility program. If you type the wrong password, you will see an error message. If you type the wrong password three times, you must turn the computer off and start again. If both the power-on and administrator passwords are set, you can type either password.

  • Page 51: Other Settings In The Configuration/Setup Utility Program

    5. Press Esc twice to return to the Configuration/Setup Utility program menu. 6. Select Save Settings from the Configuration/Setup Utility menu and press Enter. Then press Esc and follow the instructions on the screen to exit from the Configuration/Setup Utility program. Other settings in the Configuration/Setup Utility program The information in this section contains instructions for changing the startup sequence, Remote Administration, and the Pentium III microprocessor serial...
  • Page 52 User Guide...

  • Page 53: Chapter 5. Installing Options

    When this is not possible, place the static-protective package that the option came in on a smooth, level surface and place the option on it. v Do not place the option on the computer cover or other metal surface. © Copyright IBM Corp. 2000...

  • Page 54: Backing Up Configuration Settings

    Within the United States, call 1-800-IBM-2YOU (1-800-426-2968), your IBM reseller, or IBM marketing representative. v Within Canada, call 1-800-565-3344 or 1-800-465-7999. v Outside the United States and Canada, contact your IBM reseller or IBM marketing representative. Tools required To install or remove some options in your computer, you will need Phillips-head and a flat-blade screwdrivers.

  • Page 55: System Board

    System board Top of Monitor 1 Fan connector 7 Hard disk drive connector 2 Microprocessor 8 CMOS clear jumper 3 DIMM sockets (SDRAM) 9 Battery 4 Power connector 10 PCI expansion slot 5 CD-ROM or DVD-ROM drive 11 PCI expansion slot 12 CD-ROM or DVD-ROM drive audio connector 6 Diskette drive connector...

  • Page 56: Removing The Rear Cover

    5. Unplug the computer power cord from the electrical outlet. 6. Unplug the power cords for any attached devices from their electrical outlets. 7. Disconnect all communication cables (such as modem and network cables) from communication outlets. 8. Disconnect all other cables attached to the computer. Removing the rear cover You must remove the rear cover to install internal options such as memory and PCI adapters.
  • Page 57 Chapter 5. Installing options...

  • Page 58: Removing The Hard Disk Drive

    Removing the hard disk drive The hard disk drive must be removed before you remove the metal system board cover. To remove the hard disk drive, do the following: 1. Remove the rear computer cover. See “Removing the rear cover” on page 40.

  • Page 59: Removing The System Board Cover

    Removing the system board cover You must remove the system board cover to install memory DIMMs or PCI adapters. Attention: Proper cooling is necessary to avoid damage to your computer. Do not operate your computer without all covers in place. To remove the system board cover, do the following: 1.
  • Page 60 User Guide...

  • Page 61: Installing Memory

    Installing memory You can add memory to your computer to increase system performance. Your computer has two DIMM connectors 1 for installing memory. The following restrictions apply when installing memory: v The maximum amount of SDRAM memory is 1 GB. v Each DIMM installed must contain the same amount of memory.
  • Page 62 Note: If you are replacing an existing DIMM, remove the existing DIMM. 6. Position the new DIMM over the socket, making sure that the notches in the DIMM are aligned with the tabs on the socket. Push the DIMM straight down into the connector until the retaining clips close.

  • Page 63: Installing An Adapter

    Installing an adapter Your computer system board has two peripheral component interconnect (PCI) expansion slots. Depending on your model, the expansion slots might already have adapters installed. You can install a low-profile PCI adapter in any available PCI expansion slot. These adapters must not exceed 16.9 cm (6.66 inches) in length and 5.15 cm (2.04 inches) in height.
  • Page 64 User Guide...

  • Page 65: Chapter 6. Troubleshooting

    If you suspect that you have a software problem and your computer comes with IBM-preinstalled software, see “IBM Enhanced Diagnostics” on page 65 for information about how to run the IBM Enhanced Diagnostics program provided by IBM. Also see the operating system documentation supplied with your computer.

  • Page 66: Troubleshooting Procedure

    No - Continue at step 2. Yes - The power-on self-test (POST) did not detect a problem. Further diagnostic testing is required. Go to “Running the IBM Enhanced Diagnostics program” on page 66 and run the diagnostic programs. If you are unable to run the diagnostic programs or if the diagnostic programs do not detect an error, go to “Device troubleshooting charts”...

  • Page 67: Power-On Self-Test (Post)

    v If the failure occurred immediately after you installed or removed an option, and you have not yet updated the configuration, see “Chapter 4. Using the Configuration/Setup Utility program” on page 31. v If the computer was functioning correctly after you installed an option and is now malfunctioning, have the computer serviced.
  • Page 68 CMOS RAM memory size does not This is expected if you have removed match memory. Otherwise, Go to “Running the IBM Enhanced Diagnostics program” on page 66for instructions on running memory diagnostics. Keyboard error 1. Make sure the keyboard is properly connected.
  • Page 69 Code Description Action 178x Hard disk or IDE device failed 1. Go to “Running the IBM Enhanced Diagnostics program” on page 66, and follow the instructions for running the diagnostic program for the hard disk drive and IDE devices. 2. If the problem persists, have the computer serviced.

  • Page 70: Device Troubleshooting Charts

    1. Remove the software or device you just added. 2. Run the diagnostic programs to determine if your computer is running properly. (See “Running the IBM Enhanced Diagnostics program” on page 66 for information about diagnostic programs provided with your computer.)

  • Page 71: Audio Problems

    Sound Blaster Pro or Sound Blaster emulation. If these actions do not correct the problem, run the diagnostic programs (see “Running the IBM Enhanced Diagnostics program” on page 66). If you need technical assistance, see “Chapter 7. Getting information, help, and service”...

  • Page 72: Cd-Rom Or Dvd-Rom Drive Problems

    8. Click OK to exit from the Properties window and save the setting. If this procedure does not correct the problem, run the diagnostic programs (see “Running the IBM Enhanced Diagnostics program” on page 66). If you need technical assistance, see “Chapter 7. Getting information, help, and service”...

  • Page 73: Dvd Disc Problems

    DVD disc problems Symptom Action Black screen instead 1. Restart the DVD player program. of DVD video 2. Close any open files, shut down Windows, and restart your computer. If you need technical assistance, see “Chapter 7. Getting information, help, and service” on page 71. DVD movie will not 1.

  • Page 74: Diskette Drive Problems

    Action General monitor problems 1. Make sure the brightness controls are adjusted correctly. 2. Some IBM monitors have their own self-tests. If you suspect a problem with your monitor, see “Running the IBM Enhanced Diagnostics program” on page 66 and run diagnostics on the monitor.

  • Page 75: General Problems

    General problems Symptom Action The computer does not Verify that: start when you press the 1. All cables are securely connected to the proper power button. connectors on the computer. For the location of the connectors, see “Connecting cables” on page 8. 2.

  • Page 76: Keyboard, Mouse, Or Pointing Device Problems

    Keyboard, mouse, or pointing device problems Symptom Action All or some keys on the Verify that: keyboard do not work. 1. The computer is turned on. 2. The keyboard cable is securely connected to the keyboard connector on the computer. For the location of the keyboard connector, see “Connecting cables”...

  • Page 77: Memory Problems

    If the problem persists, run the memory test from the diagnostic program supplied with your computer. (See “Running the IBM Enhanced Diagnostics program” on page 66 for further information.) The computer might have detected a bad DIMM and automatically reallocated memory so that it could continue to operate.
  • Page 78 (See “Removing the rear cover” on page 40.) If these actions do not correct the problem, run the diagnostic programs (see “Running the IBM Enhanced Diagnostics program” on page 66). If you need technical assistance, see “Chapter 7. Getting information, help, and service”...
  • Page 79 If these actions do not correct the problem, run the diagnostic programs (see “Running the IBM Enhanced Diagnostics program” on page 66). If you need technical assistance, see “Chapter 7. Getting information, help, and service”...

  • Page 80: Optional-Device Problems

    Using the Configuration/Setup Utility program” on page 31. If the problem persists, run the diagnostic programs. (See “Running the IBM Enhanced Diagnostics program” on page 66 for information about diagnostic programs provided with your computer.) If you cannot correct the problem, have the computer and the option serviced.

  • Page 81: Software Problems

    IBM Enhanced Diagnostics IBM provides programs that you can run to diagnose hardware problems and some software problems. Several utility programs that provide helpful information about your computer are also included. The user interface for running these diagnostic and utility programs is provided by PC-Doctor.

  • Page 82: Creating An Ibm Enhanced Diagnostics Diskette

    World Wide Web for information about obtaining a Product Recovery CD. You can create an IBM Enhanced Diagnostics diskette or you can run the diagnostics directly from the product recovery program or CD. Creating an IBM Enhanced Diagnostics diskette...

  • Page 83: To Run Diagnostics From The Ibm Enhanced Diagnostics Diskette

    To run diagnostics from the IBM Enhanced Diagnostics diskette: 1. Turn off your computer and any attached devices. 2. Insert the IBM Enhanced Diagnostics diskette into the diskette drive. 3. Turn on all attached devices; then turn on your computer.
  • Page 84 To change the battery, do the following: 1. Turn off the computer and all attached devices. 2. Remove the rear cover. See “Removing the rear cover” on page 40. 3. Remove the hard disk drive. See “Removing the hard disk drive” on page 42.
  • Page 85 7. Replace the covers, and plug in the power cord. Note: When the computer is turned on for the first time after battery replacement, an error message might be displayed. This is normal after the battery is replaced. 8. Turn on the computer and all attached devices. 9.
  • Page 86 User Guide...

  • Page 87: Chapter 7. Getting Information, Help, And Service

    Chapter 7. Getting information, help, and service If you need help, service, technical assistance, or just want more information about IBM products, you will find a wide variety of sources available from IBM to assist you. This section contains information about where to go for...

  • Page 88: Getting Help And Service

    You can call the IBM Automated Fax System 24 hours a day, 7 days a week. Follow the recorded instructions, and the requested information will be sent to your fax machine. In the U.S. and Canada, to access the IBM Automated Fax System, call 1-800-426-3395.
  • Page 89 Installation and maintenance of network operating systems (NOS) v Installation and maintenance of application programs Refer to your IBM hardware warranty for a full explanation of IBM warranty terms. Be sure to retain your proof of purchase to obtain warranty service.

  • Page 90: Other Services

    In all other countries, contact your IBM reseller or IBM marketing representative. Other services IBM Update Connector is a remote communication tool that you can use with some IBM computers to communicate with the HelpCenter. Update Connector enables you to receive and download updates for some of the software that might come with your computer.

  • Page 91: Purchasing Additional Services

    In Europe, call 44-1475-893638 (Greenock, U.K.). v In Australia and New Zealand, call 61-2-9354-4171. v In all other countries, contact your IBM reseller or IBM marketing representative. IBM Integrated Technology Services offers a broad range of information technology support, implementation, and management services. For more information about these services, refer to the Integrated Technology Services Web site at http://www.ibm.com/services/its/.
  • Page 92 User Guide...

  • Page 93: Appendix. Computer Records

    This appendix contains a form for recording information about your computer, which can be helpful if you ever need to have your computer serviced. Record and retain the following information: Product name IBM Computer Type 2179 Machine type (M/T) - model __________________________________________ Serial number (S/N)
  • Page 94 User Guide...

  • Page 95: Product Warranty And Notices

    Country-unique Terms.The terms of Part 2 may replace or modify those of Part 1.The warranties provided by IBM in this Statement of Warranty apply only to Machines you purchase for your use, and not for resale, from IBM or your reseller. The term ″Machine″ means an IBM machine, its features, conversions, upgrades, elements, or accessories, or any combination of them.
  • Page 96 If a Machine does not function as warranted during the warranty period, and IBM or your reseller are unable to either 1) make it do so or 2) replace it with one that is at least functionally equivalent, you may return it to your place of purchase and your money will be refunded.
  • Page 97 Warranty Service To obtain warranty service for the Machine, contact your reseller or IBM. In the United States, call IBM at 1-800-772-2227. In Canada, call IBM at 1-800-565-3344. (In Toronto, call 416-383-3344.) You may be required to present proof of purchase.
  • Page 98 IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM’s possession or 2) in transit in those cases where IBM is responsible for the transportation charges. Neither IBM nor your reseller is responsible for any of your confidential, proprietary or personal information contained in a Machine which you return to IBM or your reseller for any reason.

  • Page 99: Ibm Statement Of Warranty Worldwide Except Canada, Puerto Rico, Turkey, United States (Part 1 - General Terms)

    If a Machine does not function as warranted during the warranty period, and IBM or your reseller are unable to either 1) make it do so or 2) replace it with one that is at least functionally equivalent, you may return it to your place of purchase and your money will be refunded.
  • Page 100 Machine set-up and installation, will be provided WITHOUT WARRANTIES OF ANY KIND. Warranty Service To obtain warranty service for the Machine, contact your reseller or IBM. You may be required to present proof of purchase. IBM or your reseller provides certain types of repair and exchange service, either at your location or at a service center, to keep Machines in, or restore them to, conformance with their Specifications.
  • Page 101 IBM or your reseller of changes in a Machine’s location. IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM’s possession or 2) in transit in those cases where IBM is responsible for the transportation charges.

  • Page 102: Part 2 - Worldwide Country-Unique Terms

    Specified Operating Environment, improper maintenance by you, or failure caused by a product for which IBM is not responsible. Limitation of Liability: The following is added to this Section: Where IBM is in breach of a condition or warranty implied by the Trade Practices Act 1974, IBM’s liability is limited to the repair or replacement of the...
  • Page 103 Consumer Guarantees Act 1993 or other legislation which cannot be excluded or limited. The Consumer Guarantees Act 1993 will not apply in respect of any goods which IBM provides, if you require the goods for the purposes of a business as defined in that Act.
  • Page 104 EGYPT: Limitation of Liability: The following replaces item 2 in this Section: 2. as to any other actual direct damages, IBM’s liability will be limited to the total amount you paid for the Machine that is the subject of the claim.
  • Page 105 Applicability of suppliers and resellers (unchanged). The following paragraph is added at the end of this Section: IBM’s entire liability and your sole remedy, whether in contract or in tort, in respect of any default shall be limited to damages.
  • Page 106 The following item is added to this paragraph: 3. breach of IBM’s obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply of Goods and Services Act 1982.

  • Page 107: Notices

    IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Any references in...

  • Page 108: Processing Date Data

    Web sites. The materials at those Web sites are not part of the materials for this IBM product, and use of those Web sites is at your own risk.

  • Page 109: Federal Communications Commission (Fcc) Statement

    Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Proper cables and connectors are available from IBM authorized dealers. IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.

  • Page 110: Avis De Conformité À La Réglementation D'industrie Canada

    Note: If the device is an internal modem, a second FCC registration label is also provided. You may attach the label to the exterior of the computer in which you install the IBM modem, or you may attach the label to the external DAA, if you have one. Place the label in a location that is easily accessible, should you need to provide the label information to the telephone company.
  • Page 111 5. If you experience trouble with this product, contact your authorized reseller, or call IBM. In the United States, call IBM at 1-800-772-2227. In Canada, call IBM at 1-800-565-3344. You may be required to present proof of purchase.

  • Page 112: Power Cord Notice

    Power cord notice For your safety, IBM provides a power cord with a grounded attachment plug to use with this IBM product. To avoid electrical shock, always use the power cord and plug with a properly grounded outlet. User Guide...
  • Page 113 The cord set should have the appropriate safety approvals for the country in which the equipment will be installed. IBM power cords for a specific country or region are usually available only in that country or region. IBM power cord part...
  • Page 114 User Guide...

  • Page 115: Index

    Configuration/Setup utility 31 installing options 37 exiting 33 intermittent problems 59 passwords 33 internal drives 2 viewing and changing settings 32 Configuration/Setup Utility other settings 35 connecting cables 8 keyboard controls and indicators 13 cleaning 27 © Copyright IBM Corp. 2000...
  • Page 116 keyboard (continued) problems (continued) locking 26 software 65 using 15 USB 65 keyboard/mouse features 3 product overview 1 RAM, adding 45 locations, system board components 38 rapid access keyboard 15 locking cover 26 rear cover, removing 40 locking the keyboard 26 removing hard disk drive 42 rear cover 40...
  • Page 117 using (continued) audio features 23 CD-ROM drive 20 Configuration/Setup utility 31 diskettes 19 power button on keyboard 25 power-management features 24 power management in Windows 98 25 security features 26 security profile by device 34 standby button on keyboard 25 video features 23 Windows start menu 24 video device drivers 23...
  • Page 118 User Guide...
  • Page 120 Part Number: 22P2750 Printed in the United States of America on recycled paper containing 10% recovered post-consumer fiber. (1P) P/N: 22P2750...

Table of Contents