Removing the side cover
To remove the server side cover, complete the following steps:
1. Review the safety information that begins on page v and "Installation guidelines"
2. Turn off the server and all attached devices (see "Server power features" on
3. Lay the server on its side.
4. Unlock the side cover; then, press the cover-release latch down, as indicated by
5. Lift the side cover off the server and set it aside.
To replace the side cover, see "Reinstalling the side cover" on page 46.
Attention:
server. Operating the server for extended periods of time (more than 30 minutes)
with the cover removed might damage server components.
22
xSeries 206m Types 8485 and 8490: User's Guide
on page 19.
page 11); then, disconnect all power cords and external cables.
the two arrows on the latch.
Cover-release
latch
Key lock
For proper cooling and airflow, replace the cover before turning on the