Table of Contents
Advertisement
supports Wake on LAN functions, you can specify a startup sequence for the
Wake on LAN functions. You can also specify whether an integrated controller or
a PCI adapter has boot precedence.
If you enable the boot fail count, the BIOS default settings will be restored after
three consecutive failures to find a boot record.
You can enable a virus-detection test that checks for changes in the boot record
when the server starts.
This choice is on the full Configuration/Setup Utility menu only.
v Advanced Setup
Select this choice to change settings for advanced hardware features.
Important: The server might malfunction if these options are incorrectly
configured. Follow the instructions on the screen carefully.
This choice is on the full Configuration/Setup Utility menu only.
– Power Button
Select this choice to enable or disable the power-control button. Enabled is
the default setting.
– Wake-up from
Select this choice to choose Normal or the power-control button as the
wake-up control.
– CPU Options
Select this choice to enable or disable Hyper-Threading, the pre-fetch queue,
C1 enhanced mode, and no-execute mode memory protection.
The default setting for Hyper-Threading is Enabled.
– PCI Bus Control
Select this choice to view the system resources that are used by the installed
PCI, PCI Express, or PCI-X devices.
– Baseboard management controller (BMC) settings
Select this choice to view information and to change mini baseboard
management controller (mini-BMC) settings.
- IPMI Specification Version
This is a nonselectable menu item that displays the IPMI version.
- BMC Hardware/Firmware Version
This is a nonselectable menu item that displays the mini-BMC firmware
version.
- Existing Event Log number
This is a nonselectable menu item that displays the number of entries in
the system-event log.
- BIOS POST Watchdog
Enable or disable the mini-BMC POST watchdog. Disabled is the default
setting.
- POST Watchdog Timeout
Set the mini-BMC POST watchdog timeout value. 5 min is the default
setting.
- LAN Settings
Select this choice to view the mini-BMC network configuration information.
- System Event Log
Select this choice to view the mini-BMC system-event log, which contains
all system error and warning messages that have been generated. Use the
arrow keys to move between pages in the log. If an optional IBM Remote
Chapter 3. Configuring the server
53
Advertisement
Table of Contents
