Chain Dialing - VTech DS6211 User Manual

Telephone operation

Chain dialing

Use this feature to initiate a dialing sequence from numbers stored in the
directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as
bank account information or access codes) from the directory, call log or
redial list.
To access a number in the directory while on a call:
1. Press MENU/
2. Scroll to the desired entry by pressing
/SELECT to dial the displayed number.
3. Press
MENU
To access a number in the call log while on a call:
Press MENU/
1.
2. Press /SELECT to select.
MENU
3. Scroll to the desired entry by pressing
/SELECT to dial the displayed number.
4. Press
MENU
To access the last number on the redial list while on a call:
Press REDIAL/
PAUSE
to cancel the chain dialing.
• You cannot edit a directory entry while on a call. For more details about the
directory, see page 16.
• You cannot copy a call log entry into the directory while on a call. For more
details about call log, see page 22.
• If you press REDIAL/
recent call, and you cannot erase the entry. For more details about the
redial memory, see page 25.
Press and hold OFF/
•
on a call.
twice to select > DIRECTORY.
SELECT
and then press
SELECT
to dial. Press REDIAL/
PAUSE
CLEAR
or .
to highlight > CALL LOG.
or
or .
PAUSE
while on a call, you can only view the most
to exit redial, directory or call log when you are
13
again within two seconds