Scanner Problems; Sound And Speaker Problems; No Sound From Integrated Speakers; No Sound From External Speakers - Dell 510D User Manual

If the printer is listed, right-click the printer icon.
3. Click Properties and click the Ports tab. For a parallel printer, ensure that the Print to the following port(s): setting is LPT1 (Printer
Port). For a USB printer, ensure that the Print to the following port(s): setting is USB.
Reinstall the printer driver — See the printer documentation for instructions

Scanner Problems

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTE: If you need technical assistance for your scanner, contact the scanner's manufacturer.
Check the scanner documentation —
Unlock the scanner — Ensure that your scanner is unlocked if it has a locking tab or button.
Restart the computer and try the scanner again.
Check the cable connections —
See the scanner documentation for cable connection information.
l
Ensure that the scanner cables are securely connected to the scanner and the computer.
l
Verify that the scanner is recognized by Microsoft Windows —
1. Click the Start button, click Control Panel, and then click Printers and Other Hardware.
2. Click Scanners and Cameras.
If your scanner is listed, Windows recognizes the scanner.
Reinstall the scanner driver — See the scanner documentation for instructions.

Sound and Speaker Problems

NOTE: This computer uses digital sound, and contains no analog audio lines. PCMCIA cards such as modems that use analog lines to produce sound will
not function.
Fill out the Diagnostics Checklist as you complete these checks.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

No sound from integrated speakers

Adjust the Windows volume control —
turned up and that the sound is not muted. Adjust the volume, bass, or treble controls to eliminate distortion.
Adjust the volume using keyboard shortcuts —
Reinstall the sound (audio) driver —

No sound from external speakers

See the scanner documentation for setup and troubleshooting information.
Double-click the speaker icon in the lower-right corner of your screen. Ensure that the volume is
Press <Fn><End> to disable (mute) or reenable the integrated speakers.
See "Reinstalling Drivers and Utilities."