Table of Contents
Advertisement
Using the System Setup Program
Overview
Viewing the System Setup Screens
System Setup Screen
Commonly Used Options
Overview
NOTE:
Your operating system may automatically configure most of the options available in system setup, thus overriding options that you set through
system setup. (An exception is the External Hot Key option, which you can disable or enable only through system setup.) For more information on
configuring features for your operating system, see your Windows Help (Microsoft® Windows® 2000) or the
(Windows XP).
You can use system setup as follows:
To set or change user-selectable features—for example, your computer password
l
To verify information about the computer's current configuration, such as the amount of system memory
l
After you set up the computer, run system setup to familiarize yourself with your system configuration information and optional settings. You may want to
write down the information for future reference.
The system setup screens display the current setup information and settings for your computer, such as:
System configuration
l
Boot order
l
Boot (start-up) configuration and docking-device configuration settings
l
Basic device-configuration settings
l
System security and hard-drive password settings
l
NOTICE:
Unless you are an expert computer user or are directed to do so by Dell technical support, do not change the system setup settings. Certain
changes might make your computer work incorrectly.
Viewing the System Setup Screens
1. Turn on (or restart) your computer.
2. When the DELL™ logo appears, press <F2> immediately. If you wait too long and the Windows logo appears, continue to wait until you see the
Windows desktop. Then shut down your computer and try again.
System Setup Screen
The System Setup screen consists of three panes. The left pane contains a menu of control categories. To show or hide subcategories, select a category (such
as System, Onboard Devices, or Video) and press the <Enter> key. The right pane displays information about the category or subcategory.
The bottom pane describes how to control system setup with key functions. Use the keys to select a category, modify settings, or exit system setup.
Commonly Used Options
Windows Help and Support Center
Advertisement
Table of Contents
