AT&T TL76108 - 5.8GHz Digital Corded/Cordless Answering System User Manual page 29

Telephone operation
NOTES:
1. If the called handset is
not answered within 30
seconds, the outside call
will be put on hold and will
return to the telephone
base. If the call is not
resumed in five minutes,
the telephone base will ring
and the screen will display
CALL ON HOLD RING
BACK! When it rings back
if the call is not answered
in 30 seconds, the call will
disconnect.
2. Pressing OFF/
CLEAR
the handset or CLEAR on
the telephone base will
temporarily silence the
intercom ringer.
Call transfer using intercom
At the telephone base:
Use the intercom feature to transfer an outside
call to any cordless handset in the system.
1. While on an outside call, press
/
INTERCOM
2. Press the
handset and press the OK softkey, or enter
the handset number (e.g. 1 for handset 1). The
called handset will ring, and its screen will
show TRANSFER FROM BASE.
On the ringing handset, press LINE 1
3.
LINE 2
/X-FER/
connected to the outside call.
If you want to intercom the desired handset
on
before the outside call is transferred, press the
HOLD softkey to put the outside call on hold and
follow the steps for Intercom on page 24. After
the end of the intercom call, resume the outside
call by pressing the corresponding line button and
follow the steps on this page to transfer the call.
/TRANSFER on the telephone base.
or softkey choose the desired
SPEAKER, or
/
FLASH,
INTERCOM and it will automatically be
26
,
/
FLASH