AT&T TL76108 - 5.8GHz Digital Corded/Cordless Answering System User Manual page 23

Telephone operation
1
VOL HOLD MUTE
HOLD softkey
H
CALL
ON HOLD
RDL MENU CID
Options while on calls
Hold
While on a call, you can press the HOLD softkey
to put a call on hold and the screen will display
CALL ON HOLD for four seconds and H will be
shown at the top left corner of the screen. Press
the corresponding line button (LINE 1 or LINE 2)
to resume the call.
• If the call is not resumed in five minutes, the
handset or telephone base will ring, and the
screen will display CALL ON HOLD RING
BACK! While it rings back and the call is not
answered in 30 seconds, the call will be ended.
• If you are on a call on the other line, there will
be no ring back and the call on hold will be
ended in five minutes without warning.
Temporary tone dialing
If you have dial pulse (rotary) service, you can
switch to touch tone dialing during a call by
pressing . This can be useful when sending tone
signals to access to answering systems or long-
distance services.
When the call is ended the telephone will return
to tone dialing.
20