22 Importer tool
Advanced usage
Advanced usage
To delete entries from the address cache
1
In the Symantec System Center console, on the Tools menu, click Discovery
Service.
2
Under Cache Information, click Clear Cache Now.
Once you run Discovery after the data import, the correct data is available for
future discovery sessions.
The command line takes four parameters:
Import file path
■
First delimiter
■
Second delimiter
■
Order (1 = computer name/IP address, 2 = IP address/computer name; the
■
default is 1)
Note: The second delimiter needs to be a single character only. For example, the
ampersand cannot be used because the user would have to enter the following:
"&"
For example, an import file named Machines.txt, in C:\MACHINES, could read as
follows:
192.168.3.121/Server 1
192.168.3.122/Server 2
192.168.3.123/Server 3
The above example is in IP address/computer name order (2). The first
parameter is a slash (/) and the second is a linefeed. The corresponding syntax
for the command line would be:
importer C:\MACHINES\Machines.txt / LF 2
After the computer name and IP address pairs are imported, entries are created
in the registry under the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\INTEL\LANDesk\VirusProtect6\
CurrentVersion\AddressCache
You must run a local or intense discovery after importing the data file. The
discovery queries the computer IP addresses. The computers running Symantec
AntiVirus are added to the Discovery Service in memory and have complete