Symantec 10547849 - Mail Security For SMTP Installation Manual page 65

Integrating Symantec Mail Security with Symantec Security Information Manager
Installing and configuring event logging to the Information Manager
You must install the local SSIM Agent on all computers on which Symantec Mail
Security for SMTP is installed.
To install the local SSIM Agent on Windows
1
Ensure you are logged into the Symantec Mail Security for SMTP machine
on the console or via SSH as an administrative user.
2
Insert the Symantec Mail Security for SMTP product CD in the CD drive.
3
Launch a Command window, navigate to the
CD, and use the following command:
setup.exe [ -debug ] [-log] [-a{ProdID}] [-f{filename}] [-s{server}] [-p
where
specifies the hostname or IP of the management server, and
-s{server}
-i{install path}
be installed. If you omit this parameter, the SSIM Agent will be installed in
the default folder, which is
(example:
setup.exe -s192.168.0.10
The installer runs and completes.
To install the local SSIM Agent on Linux/Solaris
1
Ensure you are logged into the Symantec Mail Security for SMTP machine
on the console or via SSH as root.
2
Navigate to the
/Agents/
file to a temporary directory on the hard drive.
Unix.tar.gz
3
After you have copied the file, decompress the SSIM Agent directory using
the following commands:
gunzip Unix.tar.gz
tar xvf Unix.tar
\Agents\
specifies the destination path where the SSIM Agent will
C:\Program Files\Symantec\SESA\Agent
)
directory on the product CD and copy the
directory on the product
65