Table of Contents
Advertisement
3
Move the pointer over the template name and choose Copy from the menu.
4
Specify the details of the configuration:
a
Enter a name.
b
(Optional) Enter a description.
c
Specify a time to delete the configuration or mark the configuration for
deletion. The default value is Never.
d
Select the storage server for each virtual machine in the configuration.
e
Click Copy.
In the Workspace page, the configuration status is Copying. After a brief time, the
new configuration is available on the page.
For more information on copy operations, see "Reviewing Configuration Operations"
on page 80.
Exporting Configurations
You can export an undeployed configuration and all its virtual machine files to SMB
storage. This operation assumes that you enabled a shared folder with read and change
permissions (also covered by full control permissions). Exporting can take up to 30
minutes for each virtual machine in the configuration, depending on the size of the
virtual machine.
N
Export and import operations require an open SMB port on the Managed
OTE
Server systems. Though the installation of the Managed Server agent software
takes care of opening that port, be aware of this requirement in case someone
closes the port after the installation. To check the port status, use the
esxcfg-firewall -q smbClient command on each Managed Server system.
To export a configuration
1
In the left pane, click Workspace.
2
Move the pointer over the undeployed configuration name and choose Export
from the menu.
3
Enter the information on the configuration:
VMware, Inc.
Chapter 5 Working with Configurations
93
Advertisement
Table of Contents
