VMware VLM3-ENG-CP - Lab Manager - PC User Manual page 55

If the administrator changes the value after the initial setting, the user can
extend a lease to the original maximum value. Once the user alters the lease
time, the lease choices reset up to the latest value determined by the
administrator.
g Specify a time to delete the template (or just mark it for deletion). The default
option for marking or permanent deletion is preset by an administrator.
Most operations renew the storage lease because Lab Manager identifies the
template as in use.
If an administrator sets a system‐wide lease time, a user without
administrator privileges cannot override the value but does have the option to
extend the lease to any value up to the value set by the administrator.
If the administrator changes the value after the initial setting, the user can
extend a lease to the original maximum value. However, once the user alters
the lease time, the lease choices reset up to the latest value determined by the
administrator.
h Click Import.
4 Because Lab Manager cannot detect if LM Tools is installed on the template,
specify that information if necessary in the Web console:
a Move the pointer over the template name and choose Properties from the
menu.
b Select the LM Tools Installed check box if you know that LM Tools exists on
that template. This selection causes Lab Manager to pass the required
information to the LM Tools utility to customize network settings. If you have
a template with LM Tools but you do not select this check box, LM Tools runs
but fails to customize the network settings.
After selecting this check box, the Install LM Tools button no longer appears
on the virtual machine console. You can still access the option to install LM
Tools through the mouseover menu on the virtual machine console.
c Click Update.
VMware, Inc.
Chapter 4 Working with Machine Templates
55