Adding Scsi Virtual Hard Disks - VMware VLM3-ENG-CP - Lab Manager - PC User Manual

2 If the virtual machine is deployed, move the pointer over the template name and
choose Undeploy ‐ Save State or Undeploy ‐ Discard State from the menu.
3 Move the pointer over the template name and choose Properties from the menu.
To access the properties for virtual machines
1 In the left pane, click Workspace.
2 If the virtual machine is deployed, move the pointer over the configuration name
and choose Undeploy ‐ Save State or Undeploy ‐ Discard State from the menu.
3 Move the pointer over the configuration name and choose Details from the menu.
4 Move the pointer over the virtual machine name and choose Properties from the
menu.
To add virtual hard disks
1 After accessing the page with properties information for either machine templates
or virtual machines, click Add Hard Disk.
2 Enter the disk information:
a Specify whether the bus type is BusLogic SCSI or LSI Logic SCSI.
b Review these details on the bus number, bus ID, and disk size:
Table 3-4. Bus Number and ID Entries
Bus Type
SCSI
If bus numbers are not available, None appears in the Bus Number list.
Bus ID #7 is reserved for a SCSI adapter.
If a bus is completely used, the Bus ID list appears as an empty list.
Disk Size (GB) is limited by the space available for storage servers.
c Click Add.
The new hard disk appears in the information on properties.

Adding SCSI Virtual Hard Disks

Review these points about adding SCSI virtual hard disks:
If you add a SCSI hard disk to a virtual machine, you might generate an operating
system error message about missing drivers for this device.
VMware, Inc.
Bus Number Bus ID
0‐3 0‐15
Chapter 3 Working with Virtual Machines
39