Editing Virtual Machine Properties - VMware VLM3-ENG-CP - Lab Manager - PC User Manual

VMware® Lab Manager User's Guide
If this error occurs, download and install the appropriate driver, and contact
VMware for further support.
If you add the first instance of a SCSI hard disk to a Windows machine template,
reboot the template and log in once before publishing it. This process allows
Windows to properly recognize the new virtual hardware.
If you add the first instance of a SCSI hard disk to a Windows virtual machine in a
Workspace configuration, verify that the virtual machine network settings are
unaltered.
To verify that the virtual machine network settings are unaltered
1 Log in to the virtual machine console window.
2 From the command line, run the ipconfig command.
3 If the IP address is not the same as the one listed in the properties information for
the virtual machine, reset the IP address. See "Changing IP or MAC Addresses" on
page 34.
4 If you get an error message when changing the IP address, click No.

Editing Virtual Machine Properties

You can access and edit the properties of virtual machines.
To edit virtual machine properties
1 In the left pane, click Workspace.
2 If the virtual machine is deployed, move the pointer over the configuration name
and choose Undeploy ‐ Save State or Undeploy ‐ Discard State from the menu.
3 Move the pointer over the configuration name and choose Details from the menu.
4 Move the pointer over the virtual machine name and choose Properties from the
menu.
5 Edit the properties.
See "Reviewing the Properties List" on page 41.
6 Click Update.
40 VMware, Inc.