Input Select - Panasonic BT-LH1850 Operating Instructions Manual

Main menu
(continued)

INPUT SELECT

Sub menu
VIDEO AUTO
NTSC
PAL
NTSC SETUP
00
75
DVI-I DIGITAL
ANALOG
DIGITAL AUTO
VIDEO
COMP.
ANALOG YP
RGB-COMP.
COMPONENT SMPTE
LEVEL B75
B00
RGB-COMP. ▼
*
1
"AUTO" is the factory default, but select an appropriate format when there is risk that the input signal may be contaminated by outside
noise.
„ RGB-COMP.
„
Selecting "ANALOG." under "DVI-I" in the "INPUT SELECT" menu and selecting "RGB-COMP." under "ANALOG" opens the following
menu.
Sub menu
H POSITION 0 to 60
(Factory default setting: 30)
V POSITION 0 to 15
(Factory default setting: 8)
PHASE 0 to 31
(Factory default setting: 16)
CLOCK 700 to 1900
(Factory default setting
WXGA H SAMPLE 1280
1366
RESET
*
2
Each (compatible) input format can be adjusted but not when user data is loaded (→page27 "SETUP LOAD") or saved (→page27
"SETUP SAVE")
*
3
"CLOCK" factory default
Format
640×480 (60 Hz)
800×600 (60 Hz)
1024×768 (60 Hz)
38
Settings
Selects the VIDEO input format.
<AUTO> Automatically selects NTSC or PAL.
<NTSC> NTSC
<PAL> PAL
Selects NTSC setup level.
<00> Select this when the signal is at a 0 IRE setup level.
<75> Select this function when using 7.5 % setup signals.
(The unit internally adjusts the 7.5 % setup level to suit the black level)
Selects DVI-I input mode.
<DIGITAL> Selects digital input.
<ANALOG> Selects analog input.
Selects a DVI-I digital input mode.
<AUTO> Selects the input mode automatically depending on the input format.
<VIDEO> Selects component input.
<COMP> Selects PC input.
P Selects YP P
B R B R
<YP P >
B R
<RGB-COMP> Selects the PC RGB signal.
Selects the YP
<SMPTE> Signal level complies with SMPTE and PB and PR are 0.7 V [p-p] at 100 %
chroma.
<B75> Select this when connecting a Betacam or similar device with a setup function.
(The unit internally adjusts the 7.5 % setup level to suit the black level)
<B00> Select this when connecting a Betacam or similar device without a setup function.
Performs analog PC settings. (This page)
Settings
* 3 )
CLOCK
800
1056
1344
The underlined values are factory preset setting values.
Description
*
1
(component) or RGB input mode when DVI-I is set to ANALOG.
Selects YP P signals
B R
P (component) signal input level of DVI-I analog inputs.
B R
The underlined values are factory preset setting values.
Adjusts horizontal image display position in 2-clock units.
Adjusts vertical image display position.
Adjusts the clock phase in 1/32 clock period increments.
Adjusts the sampling clock in 2 clock units.
Select a WXGA format.
<1280> Select a 1280 x 768 format.
<1366> Select a 1366 x 768 format.
Returns H POSITION, V-POSITION, PHASE and CLOCK settings in the
RGB-COMP. input compliant format to their factory defaults.
Format
1280×768 (60 Hz)
1366×768 (60 Hz)
Description
*
2
*
2
*
2
*
2
CLOCK
1664
1792