Brother MacBroidery„ Embroidery Lettering Software for Mac Manual page 9

9 Pacesetter MacBroidery™ Embroidery Lettering Software – Recipes
Sweat Shirt
Sweat shirt fabric is stretchy, usually heavy and difficult to hoop. Hoop the stabilizer then adhere the
fabric onto the stabilizer. Place a piece of cut away under the hoop A water soluble topping may be
needed on top to keep the stitches from sinking into the fabric.
Fabric Thickness: Medium to Heavy
Fabric Stretch: Light to Much
Needle Size: Size 11 embroidery needle
Thread: Polyester embroidery thread
Stabilizer: SA5906 Lightweight Adhesive Back Water Soluble Stabilizer
SA5929 Cut-Away Heavy Weight Stabilizer
SA520 Water Soluble Stabilizer
T-Shirt
T-Shirt knits can be a variety of fabric blends and range from thin to heavy. T-Shirt knits should to be
stabilized on the top and bottom for best results. Stabilizing requirements may vary depending on the
density of the embroidery design.
Fabric Thickness: Light to heavy
Fabric Stretch: Light to lots of stretch
Needle: Ballpoint (stretch) Size 11 or embroidery needle size 11
Thread: Polyester embroidery thread
Stabilizer: SA5810 Tear-Away Medium weight Stabilizer
SA5906 Lightweight Adhesive Back Water Soluble Stabilizer
SA520 Water Soluble Stabilizer