Standard Boot Order (IPL) menu
The Standard Boot Order (IPL) option configures the Initial IPL device and controls the search order
the server uses to look for a bootable device.
NOTE:
If you enable or disable a device, restart the server. Changes do not take effect until after
reboot.
The following table describes devices and their default boot order settings.
Device
IPL:1 CD-ROM
IPL:2 Floppy Drive (A :)
IPL:3 USB Drive Key (C :)
IPL:4 Hard Drive C :
IPL:5 PCI Embedded Adapter Port 1
68
RBSU menu-driven interface (G7 and later servers)
Default boot order setting
Set the IPL Device Boot Order to 1
Set the IPL Device Boot Order to 2
Set the IPL Device Boot Order to 3
Set the IPL Device Boot Order to 4
Set the IPL Device Boot Order to 5