Hp Smart Array B320I Raid Configuration - HP ProLiant DL360e User Manual
Hp rom-based setup utility user guide
Hide thumbs
Also See for ProLiant DL360e:
- Reference manual (112 pages) ,
- Support manual (2 pages) ,
- Specification (57 pages)
Table of Contents
Advertisement
HP Smart Array B320i RAID Configuration
NOTE:
This option is available only on server models that support Dynamic Smart Array. For
more information, see the HP Dynamic Smart Array RAID Controller User Guide on the HP website
at http://www.hp.com/support/DSA_RAID_UG_en.
IMPORTANT:
Changing this setting may result in data loss or data corruption on existing drives.
Back up all drives before enabling this feature.
This option controls HP Dynamic RAID support on the SAS controller (embedded or optionally
purchased on a daughter card)
After pressing any key to clear the warning, the following options are displayed:
Enabled
Disabled
NOTE:
The default setting for this option is dependent on the server model.
40
RBSU menu-driven interface (G7 and later servers)
Advertisement
Table of Contents
