Download  Print this page

Needle And Presser Foot Section; Flat Bed Attachment - Brother LS2250PRW User Manual

Users manual - english and spanish.
Hide thumbs


Needle and presser foot
a Presser foot holder assembly
The presser foot is installed onto the presser foot holder
b Presser foot screw
Use the presser foot screw to hold the presser foot
holder assembly in place.
c Presser foot (Zigzag)
The presser foot applies pressure consistently on the
fabric as the sewing takes place. Attach the appropriate
presser foot for the selected stitching.
d Feed dogs
The feed dogs feed the fabric in the sewing direction.
e Needle plate
The needle plate is marked with guides for sewing
straight seams.
f Shuttle hook
g Shuttle cover
Open the shuttle cover to set the bobbin.
h Bobbin case
i Needle
j Needle bar thread guide
k Needle clamp screw
Use the needle clamp screw to hold the needle in place.

Flat bed attachment

The accessories are stored in a compartment inside
the flat bed attachment.
Lift the bottom of the flat bed attachment
toward you, and then pull the flat bed
attachment out to remove it.
a Flat bed attachment
b Storage compartment
● Put the accessories in the bag, and then
store the bag inside the compartment. If the
accessories are not in a bag, they may fall
out, and be lost or damaged.



Table of Contents

   Also See for Brother LS2250PRW

   Related Manuals for Brother LS2250PRW

This manual is also suitable for:

Sewing machineLs-2000Ls-2020Ls-30

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ms Lois Sep 28, 2017 06:17:
    I can’t get my needle to move to start sewing the wheel want turn. What can I do ?