Download  Print this page

AppliquÉ, Monogramming And Embroidering; Appliqués; Monogramming And Embroidering - Brother LS2250PRW User Manual

Users manual - english and spanish.
Hide thumbs

Advertisement

APPLIQUÉ, MONOGRAMMING AND EMBROIDERING
Zigzag stitches can be used for sewing appliqués, monogramming and embroidering.
Appliqués
You can create an appliqué by cutting a different
piece of fabric into a shape and using it as a
decoration.
Stitch width
1-3
Stitch length
F-2
Needle position M
Presser foot
Zigzag
Needle
Single
a
Baste the cut design to the fabric.
b
Carefully sew around the edge of the design.
Memo
● Make reinforcing straight stitches at the
beginning and the end of stitching.
CAUTION
● Be careful that the needle does not hit a pin
during sewing, as the needle can break. You
may also be injured.
c
Cut away any fabric that is left outside the
stitching.
d
Remove the basting, if necessary.
Monogramming and
embroidering
Stitch width
0-5
Stitch length
Set at any position.
Needle position M
Presser foot
None
Needle
Single
Other
Darning plate
a
Place the darning plate on the needle plate as
shown below, and then remove both the
presser foot and presser foot holder assembly.
b
Draw the lettering (for monogramming) or
design (for embroidering) on the surface of
the fabric.
c
Put the fabric in the embroidery hoop with
the surface of the fabric facing up inside the
well.
d
Place the project under the needle and lower
the presser bar.
e
Draw up the lower thread through the project
at the starting position by turning the
handwheel toward you (counterclockwise),
and then sew a few stitches to reinforce the
stitching.
3
34

Advertisement

Chapters

Table of Contents

   Also See for Brother LS2250PRW

   Related Manuals for Brother LS2250PRW

This manual is also suitable for:

Sewing machineLs-2000Ls-2020Ls-30

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ms Lois Sep 28, 2017 06:17:
    I can’t get my needle to move to start sewing the wheel want turn. What can I do ?