Download  Print this page

Drawing Up The Lower Thread - Brother LS2250PRW User Manual

Users manual - english and spanish.
Hide thumbs

Advertisement

f
While holding the thread as shown below,
pull it between the tension discs.
g
Guide the thread through the thread take-up
lever from right to left.
a Thread take-up lever
h
Put the thread behind the needle bar thread
guide above the needle.
The thread can easily be passed behind the needle
bar thread guide by holding the thread in your left
hand, then feeding the thread with your right hand.
a Needle bar thread guide
i
Thread the needle from front to back and pull
out about 5 cm (2 inches) of thread.
a 5 cm (2 inches)
Note
● If the thread take-up lever is lowered, the
upper thread cannot be wrapped around the
thread take-up lever. Make sure you raise
the presser foot lever and the thread take-up
lever before you feed the upper thread.
● If you incorrectly feed the thread you may
cause sewing problems.

Drawing up the lower thread

a
Lightly hold the end of the upper thread.
a Upper thread
b
While holding the end of the upper thread,
raise the needle to its highest position by
turning the handwheel toward you
(counterclockwise).
c
Pull on the upper thread to draw up the lower
thread.
a Upper thread
b Lower thread
d
Pull out about 15 cm (6 inches) of both
threads and pull them toward the back of the
machine under the presser foot.
a Upper thread
b Lower thread
1
14

Advertisement

Chapters

Table of Contents

   Also See for Brother LS2250PRW

   Related Manuals for Brother LS2250PRW

This manual is also suitable for:

Sewing machineLs-2000Ls-2020Ls-30

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ms Lois Sep 28, 2017 06:17:
    I can’t get my needle to move to start sewing the wheel want turn. What can I do ?