Replace the sewing light bulb.
Attach the face plate and fasten the screw
Cleaning the machine
If the surface of the machine is dirty, lightly soak a
cloth in neutral detergent, squeeze it out firmly, and
then wipe the surface of the machine. After cleaning
it once with a wet cloth, wipe it again with a dry
● Unplug the power supply cord before
cleaning the machine, otherwise injuries or an
electric shock may occur.
Cleaning the shuttle race
● Be sure to unplug the machine before
cleaning it, otherwise injuries or an electric
shock may occur.
Turn off the machine and unplug it.
Raise the needle and the presser foot, and
then remove the presser foot and the needle.
Remove the flat bed attachment and open the
shuttle cover at the front of the free arm.
Remove the bobbin case by pulling its latch
toward you and pulling it out from the shuttle
a Bobbin case latch
Slide the latch levers out from the retaining
ring to remove it.
a Retaining ring
b Latch lever