KNOWING YOUR SEWING MACHINE —————————————————————————————————————————
Hold the needle with your left hand, and then
use a coin to turn the needle clamp screw
counterclockwise to remove the needle.
● The needle can be removed by simply
loosening the needle clamp screw about
one turn. (If the needle clamp screw is
loosened too much, the needle clamp
(which holds the needle) may fall off.
Therefore, do not loosen the needle clamp
screw too much.)
b Needle clamp screw
• Do not apply strong force when loosening or
tightening the needle clamp screw,
otherwise certain parts of the sewing
machine may be damaged.
With the flat side of the needle toward the
rear of the machine, insert the needle until it
touches the needle stopper.
a Needle stopper
While holding the needle with your left hand,
use the coin to tighten the needle clamp screw
by turning it clockwise.
Install the twin needle in the same way.
● Be sure to insert the needle until it touches
the needle stopper and securely tighten the
needle clamp screw with a coin, otherwise
the needle may break or damage may result.