Download  Print this page

Removing The Presser Foot Holder - Brother LS2250PRW User Manual

Users manual - english and spanish.
Hide thumbs

Advertisement

g
Raise the presser foot lever to check that the
presser foot is securely attached.
Removing the presser foot
holder
Remove the presser foot holder when cleaning the
sewing machine or when installing a presser foot that
does not use the presser foot holder. Use a coin to
remove the presser foot holder.

■ Removing the presser foot holder

a
Remove the presser foot.
• For details, refer to "Replacing the presser
foot" (page 19).
b
Use a coin to loosen the presser foot holder
screw.
a Coin
b Presser foot holder
c Presser foot holder screw
■ Attaching the presser foot holder
a
Align the presser foot holder with the lower-
left side of the presser bar.
a Presser foot holder
b Presser bar
b
Hold the presser foot holder in place with
your right hand, and then tighten the screw
using a coin in your left hand.
a Coin
b Presser foot holder
c Presser foot holder screw
Note
● If the presser foot holder is not correctly
installed, the thread tension will be
incorrect.
1
20

Advertisement

Chapters

Table of Contents

   Also See for Brother LS2250PRW

   Related Manuals for Brother LS2250PRW

This manual is also suitable for:

Sewing machineLs-2000Ls-2020Ls-30

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ms Lois Sep 28, 2017 06:17:
    I can’t get my needle to move to start sewing the wheel want turn. What can I do ?