1. Connect the computer to external power through the
AC adapter and turn on the computer.
2. Immediately insert the Operating System disc into the
computer.
3. Press and hold the power button for at least 5 seconds to turn
off the computer.
4. Press the power button again to turn on the computer.
5. When prompted, press any key to start from the disc.
After a few minutes, you may need to select your language,
and then the Setup Wizard opens.
✎
6. Press
A licensing agreement page is displayed.
7. Press
The "Setup" page is displayed.
8. Press
The repair process begins. This process takes 1 to 2 hours to
complete.
The computer restarts in Windows after the process is complete.
Maintenance and Service Guide
On the "Welcome to Setup" page, do not press R (step 8 in
this procedure) until you have completed steps 6 and 7.
to continue.
enter
to accept the agreement and continue.
f8
to repair the selected Windows installation.
R
Software Update and Recovery
3–11