Display Assembly - HP Compaq nc6220 - Notebook PC Maintenance And Service Manual

Removal and Replacement Procedures

6.20 Display Assembly

Display Assembly Spare Part Number Information
14.1-inch, SXGA, TFT
14.1-inch, XGA, TFT
1. Prepare the computer for disassembly
and remove the following components:
a. Keyboard
b. Switch cover
c. TouchPad
2. Disconnect the wireless antenna cables 1 from the Mini PCI
communications module.
3. Remove the wireless antenna cables from the Mini PCI
compartment and the top cover clips 2 and 3.
4. Disconnect the display cable 4 from the system board.
5. Remove the two PM2.0×4.0 screws 5 that secure the display
assembly to the computer.
Disconnecting the Display Cable and Removing the Display Screws
6–36
(Section 6.9)
(Section 6.10)
(Section 6.18)
(Section
Maintenance and Service Guide
379793-001
379792-001
6.3)