Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for peerless-AV Videowall Mount PD02VW 46 55 L
Summary of Contents for peerless-AV Videowall Mount PD02VW 46 55 L
- Page 1 Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays Model: DS-VW665 Maximum Load Capacity: 125 lb (57 kg) 1 of 10 ISSUED: 03-22-12 SHEET #: 125-9288-3 10-17-12 Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
-
Page 2: Table Of Contents
NOTE: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact your local distributor. -
Page 3: Horizontal And Vertical Video Wall Mount Assembly Formula
Vertical Spacing Location - Locating the position of the bottom row of fasteners If DS-VWS0## Wall Plate Spacer Kit is not available use diagram below to determine vertical spacing. To determine lower mounting slot position of second mount, add display height to (Y1) or (Y2) DISTANCE EQUALS DISPLAY HEIGHT DISPLAY HEIGHT 10.25 1.688 Vertical Location .938 X - 10.25 + (.938 OR 1.688) = (Y1 OR Y2) Horizontal Spacing Location... -
Page 4: Parts List
Parts List Description Qty. Part # mount assembly 145‐T1577 adapter bracket 145‐T1578 mesh sleeve (not shown) 600‐1014 M5 x 10 mm socket pin type‐F screw 520‐1164 #14 x 2.5" hex head wood screw 5S1‐015‐C03 concrete anchor 590‐0320 fender washer 540‐1008 nylon shoulder washer 590‐2233 M6 x 12 mm socket pin screw 520‐1050 M8 x 15 mm socket pin screw 520‐1068 4 mm allen wrench 560‐9646 cable tie (not shown) 560‐9711 M4 x 8 mm socket pin serrated washer head screw 510‐1005 4 of 10 ISSUED: 03-22-12 SHEET #: 125-9288-3 10-17-12 Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870. -
Page 5: Installation To Wood Stud Wall
Installation to Wall Stud WARNING • Installer must verify that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. • Tighten wood screws so that wall plate is firmly attached, but do not overtighten. Overtightening can damage the screws, greatly reducing their holding power. • Never tighten in excess of 80 in. • lb (9 N.M.). • Make sure that mounting screws are anchored into the center of the stud. The use of an "edge to edge" stud finder is highly recommended. • Hardware provided is for attachment of mount through standard thickness drywall or plaster into wood studs. Installers are responsible to provide hardware for other types of mounting situations. Use a stud finder to locate the edges of the stud. Use of an edge-to-edge stud finder is highly recommended. -
Page 6: Installation To Solid Concrete Or Cinder Block
Installation to Solid Concrete or Cinder Block WARNING • When installing Peerless wall mounts on cinder block, verify that you have a minimum of 1-3/8" (35 mm) of actual concrete thickness in the hole to be used for the concrete anchors. Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally 1" (25 mm) minimum from the side of the block. Cinder block must meet ASTM C-90 specifications. It is suggested that a standard electric drill on slow setting is used to drill the hole instead of a hammer drill to avoid breaking out the back of the hole when entering a void or cavity. • Concrete must be 2000 psi density minimum. Lighter density concrete may not hold concrete anchor. -
Page 7: Installing Adapter Brackets
Attaching Adapter Brackets to Display Attach adapter brackets (B) to back of display using four M6 x 12 mm socket pin screws (I) with nylon shoulder washer (H), or four M8 x 15 mm socket pin screws (J) as shown below. NOTE: Hardware to attach dedicated plates to the mount are included with the dedicated plates. -
Page 8: Horizontal Adjustment And Locking Adapter Brackets
Horizontal Display Adjustment Adapter Brackets (B) and display can be adjusted horizontally. Lock Display in Place Once Adapter Brackets (B) are in desired position, secure adapter brackets (B) using lock bracket as show below. Loosen M4 x 8 mm socket pin serrated washer head screw (M) in slot on mount assembly (A) and rotate lock bracket forward and up as shown in detail 2. -
Page 9: Carriage Assembly Adjustment
Carriage Assembly Adjustment Use legend below to determine position of display. NOTE: Each knob can be adjusted independently for fine tuning adjustments. Turn knob CLOCKWISE to tighten Turn knob COUNTER-CLOCKWISE to loosen DOWN Turn knob COUNTER-CLOCKWISE to move corner up 9 of 10 ISSUED: 03-22-12 SHEET #: 125-9288-3 10-17-12 Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870. -
Page 10: Adapter Bracket Adjustment
Carriage Assembly Adjustment Use legend below to determine position of display. NOTE: Each knob can be adjusted independently for fine tuning adjustments. Turn knob CLOCKWISE to tighten Turn knob COUNTER-CLOCKWISE to loosen TILT FORWARD TILT BACKWARD TILT RIGHT TILT LEFT 10 of 10 ISSUED: 03-22-12 SHEET #: 125-9288-3 10-17-12 Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
Need help?
Do you have a question about the Videowall Mount PD02VW 46 55 L and is the answer not in the manual?
Questions and answers