Advertisement
Quick Links
Installation and Assembly:
Universal Tablet Mount
Max Load Capacity:
Models: PTM400, PTM400S
5 lbs (2.2 kg)
PTM400-W, PTM400S-W
Features:
• Adjustable height and width allows mount to fi t virtually any tablet
• Quick and easy installation onto desktop
• 30° of tilt and 360° of roll allows for a variety of positions in order to achieve the perfect viewing
angle
• Theft resistant security kit available
• Allows for cable management
2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerless-av.com
ISSUED: 11-15-11 SHEET #: 021-9014-2 10-15-12
Advertisement
Related Manuals for peerless-AV PTM400
Summary of Contents for peerless-AV PTM400
- Page 1 • 30° of tilt and 360° of roll allows for a variety of positions in order to achieve the perfect viewing angle • Theft resistant security kit available • Allows for cable management 2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerless-av.com ISSUED: 11-15-11 SHEET #: 021-9014-2 10-15-12...
-
Page 2: Tools Needed For Assembly
NOTE: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact your local distributor. -
Page 3: Parts List
Before you begin, make sure all parts shown are included with your product. Parts List PTM400 PTM400-W PTM400S PTM400S-W Description Qty. Part # Part # Qty. Part # Part # A stand 021-P1050 021-2050 021-P1050 021-2050 B side clamp 021-P1052... - Page 4 Fit top clamp (C) and bottom clamp (D) into stand (A) and over pins as shown in fi gures 1.1 and 1.2. fi g. 1.1 PINS fi g. 1.2 Secure with three 1/4" spacers (H), four washers (F) and three M5 x 8 mm self tapping phillips screws (G).
- Page 5 Secure two side clamps (B) to back of stand with four washers (F) and four M5 x 8 mm self tapping phillips screws (G). Do not tighten screws. Apply four adhesive foam pads (I) to front of stand as shown. To prevent scratching the tablet, set a cloth on a fl...
- Page 6 Install two plastic covers (E) to back of stand (A) with four M5 x 8mm screws (G). For security installation tighten M5 x 8mm socket pin screw (J) using security allen wrench (K) to lock display to tilt assemby. G or J 6 of 8 ISSUED: 11-15-11 SHEET #: 021-9014-2 10-15-12 ©...
- Page 7 THIS PAGE INTENTIONALLY LEFT BLANK 7 of 8 ISSUED: 11-15-11 SHEET #: 021-9014-2 10-15-12...
- Page 8 8 of 8 ISSUED: 11-15-11 SHEET #: 021-9014-2 10-15-12...