Inserting A Side Zipper - Brother LB6770 PRW Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES

Inserting a side zipper

Stitching is visible on only one piece of fabric. Use
this type of zipper application for side openings and
back openings.
1
a Stitching
b Right side of fabric
c End of zipper opening
The following procedure will describe how to stitch
on the left side, as shown in the illustration.
a Attach zigzag foot "J".
• For details on replacing the presser foot, refer
to "Replacing the presser foot" (page 43).
b
Sew straight stitches up to the zipper opening.
With the right sides of the fabric facing each
other, sew reverse stitches after reaching the
zipper opening.
• For details, refer to "Basic stitching" (page
78).
c Using a basting stitch, continue sewing to the
edge of the fabric.
1
2
a Basting stitching
b Reverse stitches
c Wrong side of fabric
d End of zipper opening
92
2
3
J
3
4
d Press open the seam allowance from the
wrong side of the fabric.
a Wrong side of fabric
e Press the seam allowance so that the right side
(the side that will not be stitched) has an extra
3 mm (1/8 inch).
2
a Wrong side of fabric
b 3 mm (1/8 inch)
f Align the zipper teeth with the pressed edge of
the fabric having the extra 3 mm (1/8 inch),
and then baste or pin the zipper in place.
1
a Zipper teeth
b Basting stitching
g Attach the presser foot holder to the right pin
of zipper foot "I".
If the stitching will be sewn on the right side,
attach the presser foot holder to the left pin of
the zipper foot.
a
I
a Pin on the right side
b Needle drop point
• For details on replacing the presser foot, refer
to "Replacing the presser foot" (page 43).
1
1
2
b