Brother LB6770 PRW Operation Manual page 79

Computerized embroidery and sewing machine
Hide thumbs Also See for LB6770 PRW:
Table of Contents

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
d
Raise the presser foot lever to check that the
side cutter is securely attached.
e
Pass the upper thread under the side cutter,
and then pull it out toward the rear of the
sewing machine.
f
Select a stitch.
• For details, refer to "Selecting stitching"
(page 49
g
Make a cut of about 2 cm (3/4 inch) long in
the fabric at the beginning of the stitching.
a 2 cm (3/4 inch)
).
1
h
Position the fabric in the side cutter.
The cut in the fabric should be positioned over
the guide plate of the side cutter.
a
a Guide plate
Memo
If the fabric is not positioned correctly, the
fabric will not be cut.
i
Lower the presser foot lever, and then start
sewing.
A seam allowance is cut while the stitching
is sewn.
Memo
If the stitching is sewn in a straight line
63
, the seam allowance will be about 5
mm (3/16 inch).
1
a 5 mm (3/16 inch)
The side cutter can cut as much as one layer
of 13-oz. denim.
After using the side cutter, clean it by
removing any lint or dust.
If the side cutter can no longer cut fabric,
use a rag to apply a small amount of oil to
the cutting edge of the cutter.
Overcasting Stitches 77
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents