Removing And Attaching The Presser Foot Holder - Brother LB6770 PRW Operation Manual

Computerized embroidery and sewing machine
Hide thumbs Also See for LB6770 PRW:
Table of Contents

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Removing and attaching the
presser foot holder
Remove the presser foot holder when cleaning the
sewing machine or when installing a presser foot that
does not use the presser foot holder, such as the
embroidery foot, optional free-motion open toe
quilting foot "O" and optional walking foot. Use the
screwdriver to remove the presser foot holder.
CAUTION
Before attaching/removing the presser
foot, be sure to turn off the sewing
machine. Otherwise, injuries may occur if
a button is accidentally pressed and the
machine starts sewing.
a
Remove the presser foot.
• For details, refer to "Replacing the presser
foot" (page 43).
b
Use the screwdriver to loosen the presser foot
holder screw.
a Screwdriver
b Presser foot holder
c Presser foot holder screw
d Presser bar
The presser foot is removed from the presser
bar.
c
a
d
b
■ Attaching the presser foot holder
Raise the presser foot lever.
a
The presser foot is raised.
Align the presser foot holder with the lower-
b
left side of the presser bar.
a
b
a Presser bar
b Presser foot holder
c
Hold the presser foot holder in place with your
right hand, and then tighten the screw using
the screwdriver in your left hand.
a
a Screwdriver
b Presser foot holder
CAUTION
Do not hit the needle with your finger or
the presser foot when attaching/removing
it. The needle may break or cause injury.
Be sure to tighten the screw with the
included screwdriver. If the screw is
loose, the needle may hit the presser foot
and break or bend.
Replacing the Presser Foot 45
b
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents