DC-in Jack Removal
Prerequisite:
LCD (Liquid Crystal Display) Module Removal
1. Find DC-in Jack Module (A) on the base assembly. Refer to
2. Remove DC-in Jack Module (A) from the base assembly.
Figure 3-35. DC-in Jack Module
DC-in Jack Installation
3. Place DC-in Jack Module (A) on the top assembly. Refer to
4. Secure DC-in cable to the cable guide on the top assembly
5. Install LCD Module.
Machine Maintenance Procedures
A
Figure
3-35.
Figure
3-35.
(Figure
3-35).
0
0
3-37