Video Capture Capability Is Not Enabled On Thinkpad Models 760Xd And 765D While Running Windows 2000; After Recording Sound Using The Microsoft Sound Recorder, The Sound Level Is Very Low During Playback; While Playing Dvds Under Windows 2000 Using The Ibm Dvd Hardware Decoder, Ac3 Audio Is Not Enabled - Lenovo ThinkPad 380E Setup Manual

Windows 2000 professional setup and technical guide
Hide thumbs Also See for ThinkPad 380E:
Table of Contents

Advertisement

5.5 Video capture capability is not enabled on ThinkPad models 760XD
and 765D while running Windows 2000
Models:
ThinkPad models 760XD and 765D
Issue:
Video capture capability is not enabled while running Windows 2000.
Cause:
This device driver for the video capture feature is not supported under
Windows 2000.
Resolution:
IBM is planning on eventually releasing updated device drivers to address
this issue.
5.6 After recording sound using the Microsoft Sound Recorder, the sound
level is very low during playback
Models:
All ThinkPad models
Issue:
While using the Sound Recorder application with the default microphone
settings, the record level is very low.
Cause:
The audio driver does not set the proper level for recording for the onboard
microphone.
Resolution:
Before recording, adjust the microphone record level in the Master Out
Volume Control. Follow these instructions to adjust the microphone record
level:
5.7 While playing DVDs under Windows 2000 using the IBM DVD hardware
decoder, AC3 audio is not enabled
Models:
ThinkPad 770 Series models
Issue:
The AC3 hardware audio feature does not function while playing DVDs
under Windows 2000.
Cause:
Design limitation of the IBM DVD decoder device drivers for this current
release.
Resolution:
IBM is planning on eventually releasing updated device drivers to address
this issue.
1
Start your computer and logon to Windows 2000 Professional with
an Administrator user account.
?
2
Click: Start
Settings
3
Double-click the Sounds and Multimedia applet. After the
"Sounds and Multimedia Properties" window opens, click the
"Audio" tab.
4
Under Sound Recording click [Volume].
5
In the "Recording Control" window, adjust the Microphone
Balance setting to the desired level.
6
After adjusting the record level, the next time you use the Sound
Recorder application, the recorded sound level will be louder.
?
Control Panel.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents