Lenovo ThinkPad 380E Setup Manual page 2

UltraslimBay device swapping with ThinkPad models 600, 600E, & 600X: ............................... 47
UltraslimBay device swapping with ThinkPad 570 and 570E: ....................................................... 47
UltraBay FX device swapping with ThinkPad mode ls 390, 390E, & 390X:................................ 48
ACPI ThinkPad Device Support under Windows 2000
Power-saving modes and system indicators ......................................................................................... 49
PC Card and CardBus devices, Plug-and-Play and Power Management support.................... 49
Network device support and power management .............................................................................. 50
Using the multi-monitor feature of ThinkPad computers under Windows 2000....................... 54
Windows 2000 Hints and Tips........................................................................................................................... 56
1 Power Management
1.1 TrackPoint / Mouse activity does not turn -on LCD monitor when "Turn Off
Monitor" is set
........................................................................................................................................... 56
1.2 Excessive keyboard or TrackPoint pointer or PS/2 mouse activity while
system is returning from Standby will cause pointing devices to malfunction
1.3 When system resumes from RTC wakeup with Prompt for Password enabled,
keyboard or mouse does not function afterwards
1.4 System resumes from S1 sleep mode when attaching or detaching the AC
adapter
.......................................................................................................................................................... 56
1.5 Wake-On-LAN from Power Off state (IBM WOL feature) does not function
after a Windows 2000 shutdown
1.6 Wake-On-Ring (WOR) does not function on APM-supported ThinkPad
model running Windows 2000
1.7 When the computer wakes up from Standby by Wake-On-Ring, Wake-On-
LAN , or RTC resume the LCD display does not turn on
1.8 The LCD monitor does not turn on when the computer returns from Standby
57
1.9 After computer returns from Hibernation mode, both the CRT and LCD
monitor are active -- cannot keep the previous display condition.
1.10 Remaining battery capacity appears as "unknown" after removing and re -inserting
battery dev ice ................................................................................................................................................ 58
2 Docking Station and Power Management
2.1 Cannot use password protected hard drive if hard disk drive is located in the
docking station
........................................................................................................................................... 59
2.2 ISA add-on device installed on docking station may not function after system
returns from Standby
2.3 An IDE device installed on the docking station is not detected under Windows
2000 59
2.4 APM-supported ThinkPad does not enter Standby or Hibernation when
computer is docked
2.5 After undocking the ThinkPad computer from a docking station or port
replicator, the TrackPoint does not function if external pointer device is attached
to docking station
2.6 Printer device connected to parallel port does not function after docking or
undocking computer ................................................................................................................................... 60
2.7 After undocking the computer, the Fn function key and AC/DC power generated
events might not function properly......................................................................................................... 61
3 Plug-and-Play Functionality
3.1 System behaves slower just after docking or undocking
3.2 After upgrading from Windows 95 to Windows 2000, the "Unplug or Eject
Hardware" icon does not appear in the desktop Taskbar even if a PCCard /
CardBus de vice is present
4 PC Cards and Device Support
4.1 Dial tone from PCMCIA modem card cannot be heard
4.2 Removing a PC Card and CardBus device while system is in Standby mode
then waking the system produces a "Surprise Device Removal" window
5 Multimedia
.............................................................................................................................................. 64
............................................................................................................................ 56
........................................................................................................ 57
............................................................................................................ 57
............................................................................................................................. 59
..................................................................................................................................60
..................................................................................................................................... 60
........................................................................................................... 62
.................................................................................................................... 62
....................................................................................................... 63
.............................................................. 49
..................................................................... 56
.................................................... 57
.................................... 57
................................................................................ 59
........................................... 62
........................................... 63
............. 56
...................... 63