Lenovo ThinkPad 380E Setup Manual page 4

Windows 2000 professional setup and technical guide
Hide thumbs Also See for ThinkPad 380E:
Table of Contents

Advertisement

Before proceeding farther into the guide, the following chart illustrates what steps should be
completed before, while, and after installing or upgrading to Windows 2000 Professional.
Use this chart as quick reference when preparing to install or upgrade to Windows 2000
Professional:
START
?
Preparation
?
"Update"
computer
?
Pre-setup
?
Installing or
upgrading to
Windows 2000
?
Post-setup
?
FINISH
New Install
Read this document and the Windows 2000 Release Notes for Setup
(\SETUPTXT\PRO1.TXT and PRO2.TXT)
Determine if your ThinkPad computer meets all the minimum hardware
requirements for running Windows 2000 Professional.
Review the Hardware Compatibility List (HCL) to determine if your devices
are supported while running Windows 2000.
Decide to upgrade or clean install Windows 2000 Professional.
Does your ThinkPad support Advanced Power Management (A PM) or
Advanced Configuration and Power Interface (ACPI) while running Windows
2000 Professional.
Build the System Program Service (BIOS) Diskette and update the system
BIOS.
Update the CD-ROM or DVD -ROM drive firmware, if applicable.
Install at least 64 megabytes (MB) of system memory on your ThinkPad
computer.
For ThinkPad model 760XD and 765D/L, download from the IBM Web site,
®
the Mwave
DSP Audio and Telephony device drivers for Windows 2000.
Also, download the Mwave MIDI samples from the IBM Web site.
Back-up all data files and
information on the computer before
starting clean install.
Decide if dual -startup configuration
is desired.
Create Startup diskettes for non-
bootable CD-ROM drives or
external CD-ROM drives.
Install Windows 2000 Professional :
Computer with bootable CD-ROM .
Computer with non-bootable CD-
ROM .
Computer with external CD-ROM .
Post-install or upgrade to Windows 2000 Professional
o Setting LCD display resolution and color depth, if applicable.
o Installing Advanced Power Management, if applicable.
o Installing IBM device drivers for Windows 2000.
o Installing software applications for Windows 2000.
General Technical Information
o Docking and undocking support for docking stations and port replicators.
o Hot and warm-swapping support for ACPI-supported computers.
o ACPI ThinkPad device support under Windows 2000.
Windows 2000 hints and tips
Upgrade Install
Verify space on hard disk drive
o Partition is at least 2 GB in
size.
o At least 650 M B of free space.
If not, clean install instead.
o Verify the OS/2 Boot Manager
is not installed.
Back-up all data files and
information on the computer
before upgrading.
Uninstall all unsupported
applications and utilities.
Upgrade to Windows 2000
Professional

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents