HP D7171A - NetServer - LPr Manual page 2

Intra-cluster
(Heartbeat) LAN
Power source
System software:
Navigator version
Operating System
Service Pack
SPU
Model
Clock speed
No. of CPUs
BIOS version
CPU cache
RAM
Local storage
I/O slots
Default Boot Order
Microsoft and HP
Certified
Configuration
Storage
Local
Controller
Driver
Cabinets (Physical drive
location)
Disk drives
SCSI bus
SCSI Ids
Shared
HP Rack Storage/12FC
Host Bus Adapter
Model
No. of controllers
Driver
Embedded NIC with crossover cable, or, configure as a VLAN through an
Ethernet switch. See Intra-cluster LAN
Direct from power mains, power conditioner or uninterruptible power
supply (UPS) using any power conditioner or UPS. Redundant power
distribution units (PDU' s) are strongly recommended.
L.20.00 or later
Microsoft Windows 2000 Advanced Server
SP1 or later
HP NetServer LP2000r
1 GHz
2
4.06.16 or later
Any size
256 MB minimum. Must be HP.
See Local Storage below.
Added cards may be installed in any appropriate slot, keeping in mind
the server's default boot order as listed below:
IDE CD-ROM, FDD, PCI-1, PCI-2, PCI-3, Embedded SCSI
P1 – Local storage (NetRAID-1M)
P2 – Shared Storage FC HBA (D8602B)
Booted from NetRAID-1M
May use embedded SCSI, NetRAID-1Si, NetRAID-3Si, NetRAID-1M,
or NetRAID-2M
For SPOFless, recommend NetRAID-xM with internal drives in RAID-
5, or another fault-tolerant RAID level.
For embedded SCSI, use SYM_U3.SYS, version 5.07.00 or later.
For NetRAID-xSi, use MRAID35X.SYS, version 2.66 or later.
For NetRAID-xM, use MRAID2K.SYS version 5.20 (Navigator L.20.00
or later)
SPU internal drive bays or HP external drive cabinet (e.g., HP Rack
Storage/12), any number.
Must be HP (hot swap or fixed).
Any HP cables that meet SCSI specifications and any SCSI bus speed.
Any
Required - D5991A
HP Fibre Channel Host Bus Adapter - HP D8602B
1
HP D8602B - AFCW2K.SYS 3.0.3245.1
2
below.