Determining The 4-Digit Code - Radio Shack 4 Owner's Manual

15-1917.fm Page 11 Monday, July 19, 1999 12:25 PM
If your device does not turn off after you
press the number keys, press
press again. If the device turns off,
PWR
press to lock in that code.
SETUP
If your device still does not turn off, press the
numbers through
1
see if the device responds. If the device
turns off after you press one of the digit keys,
press to lock in that code.
SETUP
If your device still does not turn off after you
press the number keys again, press
then press again. If the device turns off,
PWR
press to lock in that code.
SETUP
If your device still does not turn off, press the
numbers through
1
see if the device responds. If the device
turns off after you press one of the digit keys,
press to lock in that code.
SETUP
Note: If your device still does not respond,
follow the steps in "If You Have Problems" on
Page 32.
Repeat Steps 2–5 for additional devices.
DETERMINING THE 4-DIGIT
CODE
After you set up your Phone Up 4, you can find
which 4-digit device code the Phone Up 4 is set to
by following these steps. We recommend that you
do this and write down this information so you can
easily enter it if your remote control ever stops
working.
1. Press the device key you want to get the
manufacturers' codes from.
2. Press and hold
SETUP
blinks twice, then release it.
Need help? Call 1-800-950-7044
, then
CHAN ^
and , one at a time, to
9 0
CHAN ^
and , one at a time, to
9 0
until the red light
11
,