Chapter 3
bottom front of the chassis. To remove, pull the bezel forward until it unsnaps,
then lift the bezel forward and upward from the chassis face (see Figure 3-1).
Figure 3-1. Removing the HP NetServer LH 4 Bezel
CAUTION
The NetServer covers are heavy. Support them as you remove
them, and allow room to move them away from the NetServer
and for storage when removed.
Cover 1
Once you have removed the bezel, remove cover 1 by unscrewing the thumbscrew
and then pulling the cover forward to disengage it. Lift it outward and away from
the chassis (see Figure 3-2).
Cover 2
Remove cover 2 by unscrewing the thumbscrew, pulling the cover forward and
then slightly sideways to disengage it. Lift it up and away from the chassis (see
Figure 3-2).
10
Removing and Replacing Covers