HP D7171A - NetServer - LPr User Manual page 61

Chapter 8
3. Extend the slides until you hear a click, indicating they are locked. Note
that slides do not come apart.
4. Remove power supplies and hard disk drives from the server to reduce the
total weight to be lifted.
WARNING
Two people are required to move or lift the NetServer. The
HP NetServer LH 4r weighs up to 176 pounds (80 kg.) when
fully loaded.
5. Lift the NetServer by the handles until the handles are above the extended
slide members (see Figure 8-9).
6. Move the NetServer toward the rack, between the slide members, until all
four NetServer handles are over the slide members. The NetServer must
be slid onto the slides through the handles. You cannot lower it onto the
slides.
Figure 8-9. Mounting the NetServer on the Slides
Installing the NetServer in an HP Rack System/E or Rack System/U
55