Compatibility - HP StorageWorks 2/8-EL - SAN Switch Release Note

Compatibility

■
■
Compatibility
SAN Switch firmware v3.1.x is compatible with the StorageWorks SAN Switch
software version 2.6.1 and 4.1.x, allowing both 1 and 2 Gb switches to operate in
the same fabric.
For the latest supported configurations, please refer to the HP StorageWorks SAN
Product Support Tables for the SAN Design Reference Guide, part number
AV-RNZEM-TE, available at:
http://h18000.www1.hp.com/products/storageworks/san/documentation.html
Note:
supported with the SAN Switch 2/8.
The minimum supported firmware level for the StorageWorks Enterprise Virtual
Array is VCS v1.02. The upgrade of the Enterprise storage subsystem firmware
must be performed before the upgrade of the switch firmware. Please consult the
Enterprise Virtual Array technical documentation for specific information for
upgrading VCS firmware.
MIB Files
MIB files are used for SNMP applications such as HP OpenView and HP Insight
Manager. The SAN Switch 2/8 supports the following MIB files:
■
■
■
■
■
■
14
Relocating devices to new ports or new switches (Add, Move, or Change type
operations)
Updating the core PID format
HP StorageWorks 1 Gb switch models running software version 1.6d are
BRCD_v5_0.mib—Switch Vendor Registration MIB
ENTITY_RFC2737.mib—Switch Entity MIB
FA_v3_0.mib—Fibre Alliance Framework Integration MIB
FE_RFC2837.mib—Fabric Element Switch MIB
HA_v5_0.mib—High Availability MIB
SW_v5_0.mib—Switch MIB
SAN Switch 2/8 Version 3.1.x Release Notes
not