Table of Contents
Advertisement
1. Press the TALK/SPEAKER button.
2. Press the redial button.
-OR-
3. Press the redial button first , then use the Navigation button to select
the desired redial number.
- Press the Navigation () to review the oldest call and scroll toward the
most recent calls (higher numbers).
- Press the Navigation () to review the newest call and scroll to older calls
(lower numbers).
NOTE: You may choose from the last ten numbers that were
dialed.
4. Press the TALK/SPEAKER button. The number dials automatically.
If you get a busy signal and want to keep dialing the number, press the
redial button to quickly redial the number.
Exit
Press the BACK/R/C button to exit a menu function and return to the
standby mode.
Paging the handset
This feature allows you to find a misplaced handset . Press the FIND button
on the base unit , handsets ring for up to 30 seconds. To stop the page,
press the FIND button again or press any button on any cordless handset .
Mute
During a call you can switch OFF the microphone. The call is placed on
hold.
1.
Enable MUTE function: Press the MENU/OK/mute button during a call,
the display shows Mute On.
2.
Disable MUTE function: Press the MENU/OK/mute button to continue
the call.
Receiver volume control
When the handset is ON (in talk mode) you may adjust the receiver volume
by pushing the Navigation button. There are three volume levels to choose
from. When the maximum or minimum volume level is reached, the phone
beeps twice. Volume 1 is minimum and Volume 3 is maximum.
Advertisement
Table of Contents
