Flash; Exit; Handset Volume; Headset Volume - RCA 25110 User Manual

Operation

Flash

Use the Prog/Flash button to activate custom calling services such as call waiting or
call transfer, which are available through your local phone company.
TIP: Do not use the Talk button to activate custom calling services such as call waiting, or you
will hang up the phone.

Exit

Press the *Exit button to cancel any command you initiated.

Handset Volume

While talking, press the CID/Vol ( 5 or 6 ) buttons to adjust the listening level of
the handset's earpiece. There are four volume levels. Press the 5 button to increase
the volume level, and press the 6 button to decrease. VOL 1 is the lowest level and
VOL 4 is the loudest.

Headset Volume

To Adjust Volume from Headset:

While talking, the headset receiver volume can be adjusted by pressing the Vol
( 3 or 4 ) buttons. The volume can be increased or decreased, step by step up to
4 levels. When maximum level or minimum level is reached, an error tone is emitted.
The last setting is kept when re-cradled. The headset volume level shows on the
handset LCD.

To Adjust Volume from Handset:

The headset receiver volume shall be adjusted by pressing the CID/Vol ( 5 or 6 )
buttons on handset. The volume is increased or decreased step by step up to 4 levels.
The volume level shows on handset. The last setting is kept when re-cradled.
22