Remote Access Operation; To Activate Remote Access; To Check Messages Remotely - RCA 2132 User Manual

Remote access operation

The unit answers after 15 rings if the answerer is turned off. To access
the answering system, enter your remote PIN (default:0000)
The telephone will allow you to check your messages remotely from
another phone. To use this function you must be using a tone dialing
telephone and you will need to enter your remote PIN (default: 0000).
The remote control function must be activated before it can be used.

To activate remote access

1. Press the MENU/OK key to enter menu selection.
2. Press the Navigation (or) key to select Answ. Machine and then
press MENU/OK key to select .
3. Press the Navigation (or) key to select Settings and then press
MENU/OK key to select .
4. Press the Navigation (or) key to select Remote access and then
press MENU/OK key to select .
5. Press the Navigation (or) key to select On or Off and then press
MENU/OK key to confirm.
6. A confirmation beep is played. Press HANG-UP key to go back to
standby mode.
* Once the remote control access is activated, you can check the
messages of your answering machine when you are away from home,
by calling from another phone.
* If the answering machine is turned off, you must change your master
PIN from its default 0000, before you can use the remote access
feature.

To check messages remotely

1. Call your telephone number and wait for the answering machine to
answer. You will hear a voice prompt or your OGM.
2. When your outgoing message is playing, enter your remote PIN
(default: 0000).
The outgoing message will stop playing and you will hear a short
confirmation beep.
Press 2 to start message playback.
You can also use other keys as follows.

Press 11 to go to the previous message
24