Table of Contents
Advertisement
Telephone Jack Requirements
To use this phone, you need an RJ11C type modular telephone jack
installed in your home.
If you don‟t have a modular jack, call your local phone company to find out
how to get one installed.
Installation
Digital Security System
Your cordless phone uses a digital security system to protect against false
ringing, unauthorized access, and charges to your phone line.
INSTALLATION NOTE: Some cordless telephones operate at frequencies
that may cause or receive interference with nearby TVs, microwave
ovens, and VCRs. To minimize or prevent such interference, the base
of the cordless telephone should not be placed near or on top of a TV,
microwave oven, or VCR. If such interference continues, move the
cordless telephone farther away from these appliances.
Certain other communications devices may also use the 1.9GHz
DECT frequency for communication, and, if not properly set , these
devices may interfere with each other and/or your new telephone.
If you are concerned with interference, please refer to the owner's
manual for these devices on how to properly set channels to avoid
interference. Typical devices that may use the 1.9GHz DECT
frequency for communication include wireless audio/video
senders, wireless computer networks, multi-handset cordless
telephone systems, and some long-range cordless telephone
systems.
Important Installation Guidelines
•
Avoid sources of noise and heat , such as motors, fluorescent lighting,
microwave ovens, heating appliances and direct sunlight .
•
Avoid areas of excessive dust , moisture and low temperature.
•
Avoid other cordless telephones or personal computers.
•
Never install telephone wiring during a lightning storm.
•
Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
Advertisement
Table of Contents
