Input 2 Rgb Command; Image Command; Direct On Set Command; Direct On Cancel Command - Sanyo PLC-ZM5000L - 5000 Lumens Manual

PLC-ZM5000/ZM5000L Basic Serial Command Functional Specifications

6.27 INPUT 2 RGB Command

Command "C25" [CR]
Select RGB input in Input 2.
Detail Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable

6.28 IMAGE Command

Command "C27" [CR]
Detail Switch Image Setting status
Acceptable
Response
Unacceptable

6.29 Direct on SET Command

Command "C28" [CR]
Enable Direct on
Detail This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable
Response
Unacceptable

6.30 Direct on CANCEL Command

Command "C29" [CR]
Disable Direct on
Detail
This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable
Response
Unacceptable

6.31 POWER MANAGEMENT READY Command

Command "C2A" [CR]
Set Power Management function to ready status
Detail This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable
Response
Unacceptable

6.32 POWER MANAGEMENT CANCEL Command

Command "C2B" [CR]
Set Power Management function to off status
Detail This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
16/28