Power Management Shutdown Command; D.zoom + Command; Input 3 Video Command; Input 3 S-Video Command - Sanyo PLC-ZM5000L - 5000 Lumens Manual

PLC-ZM5000/ZM5000L Basic Serial Command Functional Specifications

6.33 POWER MANAGEMENT SHUTDOWN Command

Command "C2E" [CR]
Set Power Management function to Shutdown mode.
Detail This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable
Response
Unacceptable

6.34 D.ZOOM + Command

Command "C30" [CR]
Enter Digital Zoom mode and expand image size
Detail
This command works the same way as "D.ZOOM ▲" button of the remote control.
Acceptable
Response
Unacceptable
6.35 D.ZOOM - Command
Command "C31" [CR]
Enter Digital Zoom mode and reduce image size
Detail
This command works the same as "D.ZOOM ▼" button of the remote control.
Acceptable
Response
Unacceptable

6.36 INPUT 3 VIDEO Command

Command "C33" [CR]
Select Video input in Input 3.
Detail
Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable

6.37 INPUT 3 S-VIDEO Command

Command "C34" [CR]
Select S-Video input in Input 3.
Detail Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable

6.38 INPUT 3 Y,Pb/Cb,Pr/Cr Command

Command "C35" [CR]
Select Y,Pb/Cb,Pr/Cr input in Input 3.
Detail Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
17/28