Lens Shift Left Command; Lens Shift Right Command; Auto Pc Adj. Command; Presentation Timer Command - Sanyo PLC-ZM5000L - 5000 Lumens Manual

PLC-ZM5000/ZM5000L Basic Serial Command Functional Specifications

6.57 LENS SHIFT LEFT Command

Command "C5F" [CR]
Detail Move projection area leftward.
Acceptable
Response
Unacceptable

6.58 LENS SHIFT RIGHT Command

Command "C60" [CR]
Detail Move projection area rightward.
Acceptable
Response
Unacceptable

6.59 AUTO PC ADJ. Command

Command "C89" [CR]
Execute AUTO PC ADJ. function
Detail This command works the same way as "AUTO PC" button of the remote control.
Sending this command during Auto PC Adj. process terminates the operation.
Acceptable
Response
Unacceptable

6.60 PRESENTATION TIMER Command

Command "C8A" [CR]
Start Timer for presentation
Detail
This command works the same way as "P-TIMER" button of the remote control.
Acceptable
Response
Unacceptable

6.61 PRESENTATION TIMER (Exit) Command

Command "C8B" [CR]
Exit P-Timer function.
Detail This command works the same way as pressing and hold "P-TIMER" button of the
remote control.
Acceptable
Response
Unacceptable
6.62 KEYSTONE ↑ Command
Command "C8E" [CR]
Correct keystone distortion by reducing upper part of image. This command
Detail invokes both operations of keystone distortion correction and OSD display,
regardless of whether the "KEYSTONE" OSD has been already displayed or not.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
21/28