Video Status Read Command; Cr_Sersys Command - Sanyo PLC-XW300 - 3000 Lumens Manual

PLC-XW200/250/300 Expand Serial Command Functional Specifications

9.6 Video Status Read Command

9.6.1

CR_SERSYS Command

Command "CR_SERSYS"[CR]
Get currently selected signal
Details Returns auto-detected signal in Auto mode
Only available for Video input. (N/A when Input is computer)
Acceptable
Response %a
Unacceptable
"000_%a"[CR]
"1080I60" -------------- 1080i 60Hz
"1080I50" -------------- 1080i 50Hz
"1035I". ---------------- 1035i
"720P" ------------------ 720p
"575P" ------------------ 575p
"480P" ------------------ 480p
"575I" ------------- 575i (includes Composite signal such as PAL)
"480I" ------------- 480i (includes Composite signal such as NTSC)
"NO_SIGNAL" --------------- There is no signal
"101"[CR] -------- When Input for PC is selected
46 / 64